Setup (KX-FP185/KX-FM189 only)
TAD/FAX mode!
(using the
When the TAD/FAX mode is set, the unit will work as a fax machine and/or answering device. If a fax call is detected, the unit will automatically receive the fax. If a voice call is detected, the answering device will play a greeting message and the caller can leave a voice message.
●You can use either the
Setting up the voice and fax message reception
1 Set feature #77 to “TAD/FAX” (p. 71).
2 If the arrow (▼) is not shown on the right of the display, turn it on by pressing
AUTO ANSWER .
Display: TAD/FAX MODE
●The unit will play the greeting message.
●The remaining time for recording incoming messages will be displayed.
Example: | TIME = 10m13s |
|
|
▼
ON
Display
AUTO ANSWER
Note:
●The incoming message recording time can be changed (feature #10 on page 65).
●For voice memory capacity for incoming messages, see page 86.
●When the remaining time is low, erase unnecessary messages (p. 57).
●While an incoming call is being recorded, you can monitor it through the speaker. If this feature is not required, set to “OFF” (feature #67 on page 70).
Ring count in the TAD/FAX mode
The number of rings before a call is answered can be changed on feature #06 (p. 65). You can choose from 1, 2, 3, 4, TOLL SAVER and RINGER OFF.
TOLL SAVER: When you call the unit from a remote location, the number of rings will tell you if there are any new voice messages. If the unit answers on the second ring, there is at least one new recorded message. If the unit answers on the fourth ring, there are no new recorded messages. To save the toll charges for the call, hang up immediately when you hear the third ring. The third ring indicates that there are no new recorded messages.
RINGER OFF: The unit will answer without ringing.
●If you subscribe to a Caller ID service, set to 2 or more rings.
52