Setup

Recording paper!

A4 size recording paper (210 mm x 297 mm) can be loaded. The unit can hold up to 50 sheets of 60 g/m2 to 75 g/m2 paper or 30 sheets of 90 g/m2 paper.

1

Fan the stack of paper to prevent a paper

jam.

2 Pull the tension bar forward and hold open while inserting the paper.

The paper should not be over the tab.

If the paper is not inserted correctly, readjust the paper or the paper may jam.

CorrectIncorrect

Stack of paper

Note for recording paper:

Recording paper entrance

Tension bar

Tab

Avoid paper with a cotton and/or fiber content that is over 20%, such as letterhead paper or paper used for resumes.

Do not use different types or thicknesses of paper at the same time. This may cause a paper jam.

Avoid extremely smooth or shiny paper that is highly textured.

Avoid paper that is coated, damaged or wrinkled.

Note:

Avoid double-sided printing.

Do not use paper printed from this unit for double-sided printing with other copiers or printers, or the paper may jam.

Some paper only accepts print on one side. Try using the other side of paper if you are not happy with the print quality.

Adding paper

Tension bar

 

1. Pull the tension bar forward and hold open while removing all of the installed paper.

2. Add paper to the removed paper and straighten.

3. Fan the stack of paper.

4. Pull the tension bar forward and hold open while inserting the paper.

11

Page 13
Image 13
Panasonic KX-FM189E, KX-FP185E operating instructions Setup, Recording paper, Adding paper Tension bar