Remote Operation

Erasing incoming messages from memory

Erasing a specific message

Press 4 while listening to the message you want to erase.

A long beep and the voice guide will be heard. The unit will then continue with the next message.

Voice guide example:

The message has been erased.

Erasing all messages

Press 5 to erase all messages.

A long beep and the voice guide will be heard.

All messages have been erased.

Other remote operations

Monitoring the room

Press 6 to monitor the sound in the room where the unit is installed.

You can monitor the room sound for about 30 seconds.

After 30 seconds, a beep sounds. To continue monitoring, press 6 again within 10 seconds.

Recording a marker message

After playing back the recorded messages, you can leave an additional message.

1.Wait for the voice guide to tell you that the remote operation has ended.

2.Wait about 10 seconds for the voice guide to prompt you to leave a message.

3.Leave a message after the beep.

All messages have been played.

Please leave your name and message after the beep.

Re-recording a greeting message

You can change the contents of the greeting message for the TAD/FAX mode.

1.Press 7 to start recording.

A long beep will sound.

2.Speak clearly up to 16 seconds.

If you pause for over 2 seconds, 6 beeps will sound and the recording will stop. Repeat from step 1 within 10 seconds.

3.When finished, press 9 .

The new greeting message will be played.

110