2

Pull the tension bar forward and hold open while

inserting the paper.

 

 

● The height of the stack of the paper should not

 

exceed the upper limit on the paper tray,

 

otherwise the paper may jam or multi-feed.

 

● The paper should not be over the tab.

 

● If the paper is not inserted correctly, readjust the

 

paper or the paper may jam.

 

 

Correct

Incorrect

 

Stack of

 

 

paper

 

 

Paper tray

 

Setup (Main Unit)

Upper

Initial Preparation

 

limit

 

 

Tab

 

 

 

 

 

 

 

 

 

 

 

 

 

Tension bar

Note:

●Avoid paper with a cotton and/or fiber content that is over 20%, such as letterhead paper or paper used for resumes.

●Do not use different types or thicknesses of paper in the paper tray at the same time. This may cause a paper jam.

●Avoid extremely smooth or shiny paper that is highly textured. Also avoid paper that is coated, damaged or wrinkled.

●Avoid double-sided printing.

●Do not use paper printed from this unit for double-sided printing with other copiers or printers, or the paper may jam.

●Do not reinsert the ejected paper into the recording paper exit.

●Some paper only accepts print on one side. Try using the other side of paper when you are not happy with the print quality.

Adding paper to the paper tray

 

1. Pull the tension bar forward and hold open while

Tension bar

removing all of the installed paper.

 

2. Add paper to the removed paper and straighten.

3. Fan the stack of paper.

4. Pull the tension bar forward and hold open while inserting the paper.

25