Options

Ring count in the TAD/FAX mode

This feature determines the number of rings before the unit answers a call in the TAD/FAX mode. You can choose from 1, 2, 3, 4, TOLL SAVER and RINGER OFF.

TOLL SAVER: When you call the unit from a remote location, the number of rings will tell you if there are any new voice messages. If the unit answers on the second ring, there is at least one new recorded message. If the unit answers on the fourth ring, there are no new recorded messages. To save the toll charges for the call, hang up immediately when you hear the third ring. The third ring indicates that there are no new recorded messages.

RINGER OFF: The unit will answer without ringing.

Helpful hints:

To answer a call before the unit does, increase the number of rings.

If you have difficulty in receiving faxes from machines that have an automatic transmission feature, decrease the number of rings.

1

Select “TAD/FAX” in step 4 of feature setting #77

(p. 79).

 

 

 

 

2

Press

MENU .

 

 

 

 

 

Display:

1.SYSTEM SET

UP

 

 

 

3

Press

, then

0 6 .

 

 

 

 

 

 

 

TAD RING COUNT

 

 

 

 

4

 

 

 

 

Press

START/SET/COPY .

 

 

 

 

RING=2

▼▲

 

 

 

 

5

 

 

 

 

Press

or

to select the desired setting.

6

Press

START/SET/COPY .

 

 

 

 

SETUP ITEM [

]

 

 

 

 

7

Press

MENU .

 

 

 

 

 

 

/

MENU

1 2 3

4 5 6

7 8 9

0

START/SET/COPY

Device

Answering

 

 

Note:

If you subscribe to a Caller ID service, set this ring count setting to 2 or more rings.

115