Setup (Main Unit)

Connections

1

2

3

Connect the handset cord.

Connect the telephone line cord.

Connect the power cord.

The unit will automatically start to

detect the dialing mode of your telephone line (see below).

When the power is turned on for the first time, the unit will print some basic information.

Power cord

120 V, 60 Hz

(protectorPower surge)

 

 

Wall jack

 

 

(RJ11C)

)

Telephone

Line surge

( protector

line cord

Note:

For additional equipment protection, we recommend the use of a surge protector. The following types are available; TELESPIKE BLOK MODEL TSB (TRIPPE MFG. CO.), SPIKE BLOK MODEL SK6-0 (TRIPPE MFG. CO.), SUPER MAX (PANAMAX) or MP1 (ITW LINX).

The warranty does not cover damage due to power line surges or lightning.

When you operate this product, the power outlet should be near the product and easily accessible.

Automatic dialing mode setting

When the telephone line cord and the power cord are connected, the unit will automatically start to detect the dialing mode of your telephone line.

Display: CHECKING LINE

Wait until one of the following messages is displayed.

LINE IS TONE Your line has touch tone service.

LINE IS PULSE Your line has rotary pulse dial service.

If the power cord is disconnected or a power failure occurs, the unit will detect the dialing mode again when power is restored.

If you connect the power cord before connecting the telephone line cord, the following messages will be shown alternately.

NO TEL LINE

 

 

 

INSERT TEL LINE

 

 

 

 

 

 

 

 

Connect the telephone line cord.

26