Remote Operation

Skipping the greeting message

Press 0 during the greeting message playback.

The unit will skip the rest of the greeting message.

Turning the message transfer on or off

You must pre-program a transfer telephone number (p. 113) before using this feature.

Press 8 1 to turn ON the message transfer.

Press 8 2 to turn OFF the message transfer.

If a transfer telephone number is not programmed, you cannot turn this feature ON. The voice guide will prompt you.

Turning the pager call on or off

You must pre-program a pager number (p. 92) before using this feature.

Press 8 3 to turn ON the pager call.

Press 8 4 to turn OFF the pager call.

If a pager number is not programmed, you cannot turn this feature ON. The voice guide will prompt you.

Voice guide example:

Message transfer is set.

Transfer phone number is 123456789.

Message transfer is off.

Transfer phone number is not set.

Pager call is set.

Pager number is 098765432.

Pager call is off.

Pager number is not set.

Device

Answering

 

 

Changing the receive mode to the

TEL mode

Press 8 0 to change the setting of the receive mode from TAD/FAX to TEL.

You cannot return to the TAD/FAX mode in the same call. To return to the TAD/FAX mode, see below.

Returning the receive mode to the TAD/FAX mode

You can change the setting of the receive mode from TEL to TAD/FAX from a remote location.

1Call your unit and wait for 15 rings.

The answering device will temporarily answer the line.

2Enter the remote operation ID during the greeting message.

Your unit will switch to the TAD/FAX mode.

111