Panasonic KX-FT31BX Signaling your pager when your unit receives a fax, Receiving Faxes

Receiving Faxes

Signaling your pager when your unit receives a fax

This feature allows your unit to call your pager when your unit receives a fax document.

1	Press	MENU .
		Display:		1.SYSTEM SET UP
2 Press		, then 7	0 .
				FAX PAGER
3
	Press	START/COPY/SET .
				MODE=OFF	▼▲
4
	Press	or	to select “ON”.
				MODE=ON	▼▲

●If this feature is not required, select “OFF”.

5	Press START/COPY/SET .
		NO.=
6
	Enter your pager number.

●You can enter a total of 46 digits and/or pauses.

Dial keypad MENU

1 2 3

4 5 6

7 8 9

0

REDIAL/PAUSE START/COPY/SET

Fax/Copy

		Example:	NO.=1122333
7
	Press	START/COPY/SET .
			SETUP ITEM [ ]
8
	Press	MENU .

Note:

●If this feature does not work properly, enter more than one pause by pressing REDIAL/PAUSE at the end of your pager number to extend the paging time.

●If you wish to display a message on your pager, enter your pager number, pause(s) and the message.

●Message programming methods may vary depending on the pager company. Contact your pager company for details.

55