Panasonic PT-RW330U, PT-RZ370U <SERIAL IN> terminal, Connection, Pin assignments and signal names, rrError response, (6), (9), (1), (5), symbol, Pin No, Details, Termination, Outside view

Chapter 6  Appendix — Technical information

rrError response

	Character string	Details
	“ERR1”	Undefined control command
	“ERR2”	Out of parameter range
Message	“ERR3”	Busy state or no-acceptable period
	“ERR4”	Timeout or no-acceptable period
	“ERR5”	Wrong data length
	“ERRA”	Password mismatch
Data length	4 bytes	―

Termination

symbol

(CR)

0x0d

1 byte

<SERIAL IN> terminal

The <SERIAL IN> terminal of the projector conforms with RS-232C so that the projector can be connected to and controlled from a computer.

Connection

7RFRQQHFWGLUHFWO\

3URMHFWRUFRQQHFWLQJWHUPLQDOV

'6XESIHPDOH

&RPSXWHU

'6XESPDOH

&RPPXQLFDWLRQFDEOHVWUDLJKW

7RFRQQHFWXVLQJ',*,7$//,1.FRPSDWLEOHGHYLFH

3URMHFWRUFRQQHFWLQJWHUPLQDOV	',*,7$//,1.FRPSDWLEOHGHYLFH		&RPSXWHU
',*,7$//,1.	',*,7$//,1.	'6XESIHPDOH
		'6XESPDOH
/$1FDEOHVWUDLJKW			&RPPXQLFDWLRQFDEOHVWUDLJKW

Note

ff The [RS-232C] (x page 75) connection destination must be set based on connection method.

Pin assignments and signal names

D-Sub 9-pin (female)		Pin No.	Signal name	Details
Outside view
		(1)	―	NC
(6)	(9)	(2)	TXD	Transmitted data
		(3)	RXD	Received data
		(4)	―	Connected internally
		(5)	GND	Earth
		(6)	―	NC
(1)	(5)	(7)	CTS	Connected internally
		(8)	RTS
		(9)	―	NC

118 - ENGLISH