Chapter 4  Settings — [PICTURE] menu

[PICTURE] menu

On the menu screen, select [PICTURE] from the main menu, and select the item from the sub-menu.

Refer to “Navigating through the menu” (x page 41) for the operation of the menu screen. ff After selecting the item, press asqw to set.

[PICTURE MODE]

You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.

1)Press as to select [PICTURE MODE].2)Press qw to switch [PICTURE MODE].

ff The items will switch each time you press the button.

[GRAPHIC]

The image becomes suitable for input from to the personal computer.

[STANDARD]

The image becomes suitable for moving images in general.

[CINEMA]

The image becomes suitable for movie sources.

[NATURAL]

The image is sRGB compliant.

[REC709]*1

The image is REC709 compliant.

[DICOM SIM.]*1

The image becomes similar to that of DICOM Part 14 Grayscale Standard.

[DYNAMIC]

The light output is maximized for use in bright areas.

*1 Use the factory default for the settings other than [PICTURE MODE].

Note

ff The factory default picture mode is [GRAPHIC] for still image input signals and [STANDARD] for movie based input signals.

ff DICOM is an abbreviation of “Digital Imaging and Communication in Medicine” and is a standard for medical imaging devices. Although the DICOM name is used, the projector is not a medical device, and should not be used for purposes such as diagnosis of displayed images.

[CONTRAST]

You can adjust the contrast of the colors.

1)Press as to select [CONTRAST].2)Press qw or the <ENTER> button.

ff The [CONTRAST] individual adjustment screen is displayed.

3)Press qw to adjust the level.

Operation

Adjustment

Range

Press the w button.

Brightens the screen and makes the color deeper.

-31 - 31

 

 

Press the q button.

Darkens the screen and makes the color lighter.

 

 

 

 

Attention

ff Adjust [BRIGHTNESS] first when you need to adjust the black level.

46 - ENGLISH