Chapter 1  Preparation — Start-up display

Start-up display

The initial setting screen is displayed when the projector is switched on for the first time after purchase as well as when [ALL USER DATA] (x page 81) in [INITIALIZE] is executed. Set them in accordance with circumstances.

In other occasions, you can change the settings by menu operations.

Note

ff When the projector is used for the first time, you may be required to adjust the lens zoom ring and focus ring of the projector (x page 20) to display the menu screen clearly.

Refer to “Adjusting the image” (x page 35) for details.

Initial setting (display language)

Select the language to show on the screen. (x page 58)

1)Press as to select the display language.

,1,7,$/6(77,1*

6(/(&7

(17(5 6(7

2)Press the <ENTER> button to proceed to the initial setting.

Initial setting (projector setup)

Set each item.

1)Press as to select an item.2)Press qw to switch the setting.

,1,7,$/6(77,1*

352-(&7,210(7+2' )5217)/225

&22/,1*&21',7,21 )/2256(77,1*

6&5((1)250$7

6&5((1326,7,21

0(186(/(&7 &+$1*(

(17(5 6(7

ff Refer to the following page for details of each item.

[PROJECTION METHOD] (x page 69)

[COOLING CONDITION] (x page 70)

[SCREEN FORMAT] (x page 60)

[SCREEN POSITION] (x page 60)

3)Press the <ENTER> button.

ff Fix the setting value to complete the initial setting.

Note

ff If you press the <RETURN> button in the initial setting (display language) screen, you can go back to the initial setting (display language) screen.

ff [SCREEN FORMAT] and [SCREEN POSITION] can only be set on PT-RW330U.

18 - ENGLISH