Chapter 4
ff Press as to select the day of week, and press qw to select a program number.
ff You can set the program from No.1 to No.7. “- -
How to set a program
You can set up to 16 commands to each program.
1)Press as to select [SCHEDULE].
2)Press qw to select [ON], and press the <ENTER> button.
ff The [SCHEDULE] screen is displayed.
3)Press as to select [PROGRAM EDIT].4)Press qw to select a program number and then press the <ENTER> button.5)Press as to select a command number and press the <ENTER> button.ff You can change the page using qw.
6)Press as to select [TIME], and press the <ENTER> button.7)Press qw to select the hour and minute, press as to set the time, and press the <ENTER> button.
8)Press as to select [COMMAND].9)Press qw to switch [COMMAND].ff The items will switch each time you press the button.
ff For [COMMAND] where detailed settings are available, the settings configured in Step 11) are displayed.
[COMMAND] | [COMMAND] setting | Description | |
[POWER ON] | ― | Switch on the projector. | |
[STANDBY] | ― | Enters standby. | |
[AV MUTE] | [OFF] | Cancels the AV mute. | |
[ON] | Turns off the video and audio. | ||
| |||
| [COMPUTER] | Switches to COMPUTER input. | |
| [VIDEO] | Switches to VIDEO input. | |
[INPUT] | Switches to | ||
| [HDMI] | Switches to HDMI input. | |
| [DIGITAL LINK] | Sets the input to DIGITAL LINK. | |
| [CURRENT] | Switches to DIGITAL LINK input with the currently selected | |
| connection. | ||
|
| Can only be selected when [INPUT] is set to [DIGITAL LINK]. | |
[DIGITAL LINK INPUT] |
| Switches to DIGITAL LINK input, and that input switches to | |
| [INPUT1] - [INPUT10]*1 | specified input when the Panasonic | |
| connected. | ||
|
| ||
|
| Can only be selected when [INPUT] is set to [DIGITAL LINK]. | |
| [NORMAL] | Prioritizes luminance. | |
| [ECO SAVE1] | Reduces average power by approximately 20 % compared to | |
| [NORMAL] without affecting the brightness. | ||
[LIGHT POWER] |
| ||
[ECO SAVE2] | Reduces average power by approximately 30 % compared to | ||
| |||
| [NORMAL] without affecting the brightness. | ||
|
| ||
|
|
| |
| [LOW] | Saves more power and reduces luminance. | |
[IN STANDBY MODE(AUDIO)] | [OFF] | Turns off audio output during standby. | |
[ON] | Turns on audio output during standby. | ||
| |||
[VOLUME] | [0] - [63] | Sets the volume. |
*1 When the Panasonic
10)Press the <ENTER> button.
ff The [COMMAND] detailed screen is displayed.
11)Press as to select a [COMMAND] setting.ff For [COMMAND] which requires detailed settings, the items of the detailed settings will switch each time you press qw.
ENGLISH - 73