Panasonic PT-RW330U, PT-RZ370U Security, rrCautions when setting up the projector

Chapter 1  Preparation — Precautions for use

rrCautions when setting up the projector

ffTo install and use the projector via a method that does not use the adjustable feet in a floor standing installation, fix the projector using the four screw holes for ceiling mounting (as shown in the figure).

(Screw diameter: M4, tapping depth inside the set: 10 mm (13/32"), torque: 1.25 ± 0.2 N·m)

Make a clearance of at least 12 mm (15/32") between the projector bottom and setting surface by inserting spacers (metallic) etc. between them.

ffUse the adjustable feet only for the floor standing installation and for adjusting the angle. Using it for other purposes may damage the set.

6FUHZKROHVIRUFHLOLQJPRXQW0

$GMXVWDEOHIHHW

7KHSRVLWLRQVRIVFUHZKROHVIRUFHLOLQJPRXQWDQGDGMXVWDEOHIHHW

ffDo not stack projectors on top of each other.

ffDo not block the ventilation ports (intake and exhaust) of the projector.

ffPrevent hot and cool air from the air conditioning system to blow directly to the ventilation ports (intake and exhaust) of the projector.

PPRUORQJHU PPRUORQJHU PPRUORQJHU

PPRUORQJHU

ffDo not install the projector in a confined space.

When it is necessary to install the projector in a confined space, install the air conditioning or ventilation separately. Exhaust heat may accumulate when the ventilation is not enough, triggering the protection circuit of the projector.

Security

When using this product, take safety measures against the following incidents. ffPersonal information being leaked via this product

ffUnauthorized operation of this product by a malicious third party ffInterfering or stopping of this product by a malicious third party

Take sufficient security measures. (x pages 85, 103)

ffMake your password difficult to guess as much as possible.

ffChange your password periodically.

ENGLISH - 15