Chapter 4  Settings — [SECURITY] menu

[CONTROL DEVICE SETUP]

Enable/disable the button operations on the control panel and the remote control.

1)Press as to select [CONTROL DEVICE SETUP].

2)Press the <ENTER> button.

ff The [CONTROL DEVICE SETUP] screen is displayed.

3)Press as to select [CONTROL PANEL] or [REMOTE CONTROL].

4)Press the <ENTER> button.

ff The [CONTROL PANEL] screen or the [REMOTE CONTROL] screen is displayed.

5)Press as to select [ENABLE] or [DISABLE].

ff You can set the limitation on the control from the control panel and remote control.

[ENABLE]

Enables all button operations on the projector body and remote control.

[DISABLE]

Disables all button operations on the projector body and remote control.

6)Press the <ENTER> button.

7)When the confirmation is displayed, select [OK] or [CANCEL], and press the <ENTER> button. Note

ff When a button operation is performed on the device set to [DISABLE], the [SECURITY PASSWORD] screen is displayed. To continue operations, enter the security password.

ff The [SECURITY PASSWORD] screen will disappear when the <MENU> button is pressed, or when there is no operation for approximately ten seconds.

ff If the operations of both [CONTROL PANEL] and [REMOTE CONTROL] are set to [DISABLE], the projector cannot be turned off (cannot enter standby).

ff When the setting has completed, the menu screen will disappear. To operate continuously, press the <MENU> button to display the main menu.

ENGLISH - 87