Chapter 4  Settings — [NETWORK] menu

[Advanced control] page

Click [Projector control] → [Advanced control].

1

2

1[POSITION]

Operates items related to angle of view.

2[PICTURE]

Operates items related to image quality.

[Network config] page

Click [Detailed set up] → [Network config].

ff Click [Network config] to display the [CAUTION!] screen.

ff Click the [Next] button to display the current settings.

ff The following setting change screen is displayed by clicking the [Change] button.

1[Projector name]

Enter the name of the projector. Enter the host name if it is required when using a DHCP server etc.

2[DHCP ON]/[DHCP OFF]

To enable the DHCP client function, set to [DHCP ON].

3[IP address]

Enter the IP address when not using a DHCP server.

4[Subnet mask]

Enter the subnet mask when not using a DHCP server.

5[Default gateway]

Enter the default gateway address when not using a DHCP server.

1 2

3 4 5

6 7 8

6[DNS1]

Enter the DNS1 server address.

Permissible characters for the entry of DNS1 server address

(primary):

Numbers (0 to 9), period (.) (Example: 192.168.0.253)

7[DNS2]

Enter the DNS2 server address.

Permissible characters for the entry of DNS2 server address

(secondary):

Numbers (0 to 9), period (.) (Example: 192.168.0.254)

8[Back]/[Next]

Click the [Back] button to return to the original screen. The current settings are displayed by pressing the [Next] button. Click the [Submit] button to update the settings.

Note

ff When you use the “Forward” and “Back” functions of your browser, a warning message “Page has Expired” may appear. In that case, click [Network config] again since the following operation will not be guaranteed.

ff Changing LAN settings while connected to the LAN may cause the connection to cut out.

ENGLISH - 97