Chapter 4
[DVI-I IN]
Switch the setting when the external equipment is connected to the
When digital signals are input
1)Press as to select2)Press the <ENTER> button.
ff The
ff The items will switch each time you press the button.
[EDID3] | Recognize | |
[EDID1] | Select mainly when an external device that outputs | |
player) is connected to the | ||
| ||
[EDID2] | Select mainly when an external device that outputs still | |
connected to the | ||
|
ff The items will switch each time you press the button.
Select when an external device (such as a computer) is connected via DVI terminal output. | ||
Select when an external device (such as a | ||
by use of a conversion cable or similar cable. | ||
|
When analog signals are input
1)Press as to select
2)Press the <ENTER> button.
ff The
3)Press as to select [DIGITAL/ANALOG].
4)Press qw to switch to [ANALOG].5)Press as to select [SYNC SLICE LEVEL].6)Press qw to switch [SYNC SLICE LEVEL].ff The items will switch each time you press the button.
[LOW] | Set the slice level to [LOW]. |
[HIGH] | Set the slice level to [HIGH]. |
Note
ff The optimal setting is different depending on the output setting of the connected external equipment. Refer to the instruction manual of the external equipment regarding the output of the external equipment.
ff The data for Plug and play will change when the setting is changed. Refer to “List of compatible signals” (x page 121) for a resolution that supports plug and play.
62 - ENGLISH