Chapter 4  Settings — [SECURITY] menu

[SECURITY] menu

On the menu screen, select [SECURITY] from the main menu, and select the item from the sub-menu.

Refer to “Navigating through the menu” (x page 41) for the operation of the menu screen.

ff When the projector is used for the first time

Initial password: Press awsqawsq in order, and press the <ENTER> button. ff After selecting the item, press asqw to set.

Attention

ff When you select the [SECURITY] from the main menu and press the <ENTER> button, entering a password is required. Enter the set password and then continue operations of the [SECURITY] menu.

ff When the password has been changed previously, enter the changed password, and press the <ENTER> button.

Note

ff The entered password is displayed with * mark on the screen.

ff An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.

[SECURITY PASSWORD]

The [SECURITY PASSWORD] screen is displayed when the power is turned on. If an incorrect password has been entered, operations other than the power <v/b> button or the <AV MUTE> button are not available.

1)Press as to select [SECURITY PASSWORD].2)Press qw to switch [SECURITY PASSWORD].

ff The items will switch each time you press the button.

[OFF]

Disables the security password entry.

[ON]

Enables the security password entry.

Note

ff The [SECURITY PASSWORD] setting is set to [OFF] at the time of purchase or when all the user data has been initialized. ff Change the password periodically that is hard to guess.

ff The security password is enabled after setting [SECURITY PASSWORD] to [ON] and turning the <MAIN POWER> switch to <OFF>.

[SECURITY PASSWORD CHANGE]

Change the security password.

1)Press as to select [SECURITY PASSWORD CHANGE].

2)Press the <ENTER> button.

ff The [SECURITY PASSWORD CHANGE] screen is displayed.

3)Press asqw and the number (<1> - <6>) buttons to set the password.

ff Up to eight button operations can be set.

4)Press the <ENTER> button.

5)Re-enter the password for the confirmation.

6)Press the <ENTER> button.

Note

ff The entered password is displayed with * mark on the screen.

ff If numbers have been used for the security password, the security password will need to be initialized again if the remote control is lost. Consult your dealer for the initialization method.

ENGLISH - 85