Chapter 4
[STATUS]
Displays the status of the projector.
1)Press as to select [STATUS].2)Press the <ENTER> button.
ff The [STATUS] screen is displayed.
3)Press qw to switch the pages.ff The page will change each time you press the button.
[INPUT] | Displays the input terminal currently selected. | |
[SIGNAL NAME] | Displays the input signal name. | |
[SIGNAL FREQUENCY] | Displays the frequency of the input signal. | |
[PROJECTOR RUNTIME] | Displays the operation times of the projector. | |
[INTAKE AIR TEMP.] | Displays the status of the air intake temperature of the projector. | |
[OPTICS MODULE TEMP.] | Displays the status of the internal temperature of the projector. | |
[NUMBER OF ENTRY | Displays the number of registered signals. | |
SIGNAL] | ||
| ||
[EMULATE] | Displays the [EMULATE] settings. | |
[PROJECTOR TYPE] | Displays the type of the projector. | |
[SERIAL NUMBER] | Displays the serial number of the projector. | |
[MAIN VERSION] | Displays the main version of the firmware of the projector. | |
[SUB VERSION] | Displays the sub version of the firmware of the projector. | |
[NETWORK VERSION] | Displays the network version of the projector. |
Note
ff The content of status can be sent via
[DATE AND TIME]
Set the time zone, date, and time of the
Setting time zone
1)Press as to select [DATE AND TIME].2)Press the <ENTER> button.
ff The [DATE AND TIME] screen is displayed.
3)Press as to select [TIME ZONE].4)Press qw to switch [TIME ZONE].Setting the date and time manually
1)Press as to select [DATE AND TIME].
2)Press the <ENTER> button.
ff The [DATE AND TIME] screen is displayed.
3)Press as to select [ADJUST CLOCK].4)Press the <ENTER> button.
ff The [ADJUST CLOCK] screen is displayed.
5)Press as to select an item, and press qw to set the local date and time.6)Press as to select [APPLY], and press the <ENTER> button.ff The setting of the time will be completed.
ENGLISH - 79