Chapter 4  Settings — [DISPLAY OPTION] menu

[DISPLAY OPTION] menu

On the menu screen, select [DISPLAY OPTION] from the main menu, and select the item from the sub-menu.

Refer to “Navigating through the menu” (x page 41) for the operation of the menu screen. ff After selecting the item, press asqw to set.

[COLOR MATCHING]

You can correct the color difference between the sets when multiple sets are to be used simultaneously.

Adjusting the color matching as desired
1)Press as to select [COLOR MATCHING].2)Press qw to switch [COLOR MATCHING].

ff The items will switch each time you press the button.

[OFF]

Color matching adjustment is not carried out.

[3COLORS]

The three colors [RED], [GREEN], or [BLUE] can be adjusted.

[7COLORS]

The seven colors [RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], or [WHITE] can be

adjusted.

 

[MEASURED]

Refer to “Adjusting the color matching using a colorimeter” (x page 60) for details about this mode.

3)Select [3COLORS] or [7COLORS], and press the <ENTER> button.

ff The [3COLORS] or [7COLORS] screen is displayed.

4)Press as to select [RED], [GREEN], [BLUE], or [WHITE] ([RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], or [WHITE] for [7COLORS]).

5)Press the <ENTER> button.

ff The [3COLORS:RED], [3COLORS:GREEN], [3COLORS:BLUE], or [3COLORS:WHITE] screen is displayed.

For [7COLORS], the [7COLORS:RED], [7COLORS:GREEN], [7COLORS:BLUE], [7COLORS:CYAN], [7COLORS:MAGENTA], [7COLORS:YELLOW], or [7COLORS:WHITE] screen is displayed.

6)Press as to select [RED], [GREEN], or [BLUE].

ff If [WHITE] is selected from [3COLORS], only [GAIN] can be adjusted.

7)Press qw to adjust.

ff Adjustment value will change between 0 and 2 048*1.

*1 Depends on the signal input.

Note

ff Operation when correcting the adjustment color

When the correction color same as the adjustment color is changed: The luminance of the adjustment color changes.

When correction color red is changed: Red is added to or subtracted from the adjustment color.

When correction color green is changed: Green is added to or subtracted from the adjustment color.

When correction color blue is changed: Blue is added to or subtracted from the adjustment color.

ff This adjustment should be carried out by a person who is familiar with the projector or by a service person because a high level of skill is required to make a successful adjustment.

ff Pressing the <DEFAULT> button will restore the factory default settings for all items.

ff If [COLOR MATCHING] is set to other than [OFF], [COLOR TEMPERATURE] is fixed to [USER]. (However, [WHITE BALANCE HIGH] cannot be adjusted.)

ENGLISH - 59