Chapter 4  Settings — [NETWORK] menu

[NETWORK SETUP]

Perform the initial setting of the network before using the network function.

1)Press as to select [NETWORK SETUP].

2)Press the <ENTER> button.

ff The [NETWORK SETUP] screen is displayed.

3)Press as to select an item, and change the settings according to the operation instructions of the menu.

[PROJECTOR NAME]

Change the setting when using a DHCP server.

[DHCP]

Set to [ON] when obtaining an IP address automatically using a DHCP server. Set to [OFF] when not

using a DHCP server.

 

[IP ADDRESS]

Enter the IP address when not using a DHCP server.

[SUBNET MASK]

Enter the subnet mask when not using a DHCP server.

[DEFAULT GATEWAY]

Enter the default gateway address when not using a DHCP server.

4)Press as to select [STORE], and press the <ENTER> button.

5)When the confirmation is displayed, select [OK] or [CANCEL], and press the <ENTER> button. Note

ff When using a DHCP server, confirm that the DHCP server is running.

ff Consult your network administrator regarding the IP address, subnet mask, and default gateway.

[NETWORK CONTROL]

Set up the control method of the network.

1)Press as to select [NETWORK CONTROL].

2)Press the <ENTER> button.

ff The [NETWORK CONTROL] screen is displayed.

3)Press as to select an item, and press qw to change the setting.
[WEB CONTROL]

Set to [ON] to control with the web browser.

[PJLink CONTROL]

Set to [ON] to control with the PJLink protocol.

[COMMAND CONTROL]

Set to [ON] when controlling the projector with a <SERIAL IN> terminal control command format

(x page 120).

 

Refer to “Control commands via LAN” (x page 116).

[COMMAND PORT]

Set the port number used for command control.

[CRESTRON RoomView]

Set to [ON] to control with RoomView of Crestron.

 

Set to [ON] to control with the controller of AMX.

[AMX D.D.]

Setting this function to on enables detection with AMX device discovery. For details, refer to the

website of AMX.

 

 

URL http://www.amx.com/

 

Set to [ON] when connecting the “XTP transmitter” of Extron Electronics to the <DIGITAL LINK/LAN>

 

terminal.

[EXTRON XTP]

[EXTRON XTP] must be set to [OFF] when connecting an optional digital interface box (Model No.:

ET-YFB100G).

 

 

For details of “XTP transmitter”, refer to the website of Extron Electronics.

 

URL http://www.extron.com/

[STORE]

Save the current network control settings.

4)Press as to select [STORE], and press the <ENTER> button.

5)When the confirmation is displayed, select [OK] or [CANCEL], and press the <ENTER> button.

90 - ENGLISH