Chapter 4  Settings — [PROJECTOR SETUP] menu

Setting the audio output during standby

1)Press as to select [AUDIO SETTING].

2)Press the <ENTER> button.

ff The [AUDIO SETTING] screen is displayed.

3)Press as to select [IN STANDBY MODE].4)Press qw to switch [IN STANDBY MODE].

ff The items will switch each time you press the button.

[OFF]

Turns off audio output during standby.

[ON]

Turns on audio output during standby.

Note

ff When [STANDBY MODE] (x page 71) of [ECO MANAGEMENT] is set to [ECO], audio cannot be output during standby. ff The projector has no built-in speakers.

Audio can be output via external audio systems connected to the audio output terminal.

Setting audio input when HDMI input is selected

1)Press as to select [AUDIO SETTING].

2)Press the <ENTER> button.

ff The [AUDIO SETTING] screen is displayed.

3)Press as to select [HDMI].4)Press qw to switch [HDMI].

ff The items will switch each time you press the button.

[HDMI AUDIO]

Outputs HDMI audio.

[AUDIO IN]

Outputs audio connected via the <AUDIO IN> terminal.

Note

ff If COMPUTER, DVI-I, or VIDEO input is selected, audio connected to the <AUDIO IN> terminal is output.

Setting audio input when DIGITAL LINK input is selected

1)Press as to select [AUDIO SETTING].

2)Press the <ENTER> button.

ff The [AUDIO SETTING] screen is displayed.

3)Press as to select [DIGITAL LINK].

4)Press qw to switch [DIGITAL LINK].

ff The items will switch each time you press the button.

[DIGITAL LINK AUDIO]

Outputs DIGITAL LINK audio.

[AUDIO IN]

Outputs audio connected via the <AUDIO IN> terminal.

Note

ff If COMPUTER, DVI-I, or VIDEO input is selected, audio connected to the <AUDIO IN> terminal is output.

78 - ENGLISH