Chapter 4
Note
ff When [COLOR MATCHING] (x page 59) adjustment is set to other than [OFF], [COLOR TEMPERATURE] is fixed to [USER].
Adjusting desired white balance
1)Press as to select [COLOR TEMPERATURE].
2)Press qw or the <ENTER> button.
ff The [COLOR TEMPERATURE] individual adjustment screen is displayed.
3)Press qw to select [USER].4)Press the <ENTER> button.ff The [COLOR TEMPERATURE] screen is displayed.
5)Press as to select [WHITE BALANCE].6)Press the <ENTER> button.ff The [WHITE BALANCE] screen is displayed.
7)Press as to select [WHITE BALANCE HIGH] or [WHITE BALANCE LOW].8)Press the <ENTER> button.ff The [WHITE BALANCE HIGH] screen or the [WHITE BALANCE LOW] screen is displayed.
9)Press as to select [RED], [GREEN], or [BLUE].10)Press qw to adjust the level.Item | Operation | Adjustment | Range | |
[RED] | Press the w button. | Deepens red. |
| |
Press the q button. | Weakens red. |
| ||
|
| |||
[GREEN] | Press the w button. | Deepens green. | [WHITE BALANCE HIGH]: 0 - 255 (factory default is 255) | |
Press the q button. | Weakens green. | [WHITE BALANCE LOW]: | ||
| ||||
|
|
|
| |
[BLUE] | Press the w button. | Deepens blue. |
| |
Press the q button. | Weakens blue. |
| ||
|
|
Note
ff Adjust [COLOR TEMPERATURE] correctly. All colors will not be displayed properly unless adequate adjustment is made. If the adjustment does not look suitable, you can press the <DEFAULT> button on the remote control to return the setting for the selected item only to the factory default setting.
ff The setting of [COLOR TEMPERATURE] is not reflected in internal test patterns (x page 82). Make sure to set [COLOR TEMPERATURE] while projecting input signal.
Changing the [USER] name
1)Press as to select [COLOR TEMPERATURE].
2)Press qw or the <ENTER> button.
ff The [COLOR TEMPERATURE] individual adjustment screen is displayed.
3)Press qw to select [USER].
4)Press the <ENTER> button.
ff The [COLOR TEMPERATURE] screen is displayed.
5)Press as to select [COLOR TEMPERATURE NAME CHANGE].6)Press the <ENTER> button.
ff The [COLOR TEMPERATURE NAME CHANGE] screen is displayed.
7)Press asqw to select the text, and press the <ENTER> button to enter the text.
8)Press asqw to select [OK], and press the <ENTER> button.ff The name set to color temperature is changed.
48 - ENGLISH