Chapter 4  Settings — [PROJECTOR SETUP] menu

[INITIALIZE]

Return various setting values to their factory default settings.

1)Press as to select [INITIALIZE].

2)Press the <ENTER> button.

ff The [SECURITY PASSWORD] screen is displayed.

3)Enter a security password and press the <ENTER> button.

ff The [INITIALIZE] screen is displayed.

4)Press as to select an item to initialize.
[ALL USER DATA]

Returns all setting items including [ENTRY SIGNAL], [NETWORK SETUP], [E-mail set up], and [USER

LOGO] to factory default values.

 

The projector will go into the standby status to reflect the setting values.

[ENTRY SIGNAL]

Deletes all the setting values saved for each input signal.

To delete only a part of a registered signal, perform the procedure described in “Deleting the

 

registered data” (x page 84).

[NETWORK/E-MAIL]

Returns [NETWORK SETUP] and [E-mail set up] to factory default settings.

[LOGO IMAGE]

Deletes the image registered in [USER LOGO].

5)Press the <ENTER> button.

6)When the confirmation is displayed, select [OK] or [CANCEL], and press the <ENTER> button.

[SERVICE PASSWORD]

Used by a service person.

ENGLISH - 81