Chapter 4  Settings — [PROJECTOR SETUP] menu

Note

ff Refer to “<SERIAL IN> terminal” (x page 118).

ff When [DIGITAL LINK] is selected, communication is only available using the serial terminal when the relevant device (such as an optional digital interface box (Model No.: ET-YFB100G)) is connected to the <DIGITAL LINK/LAN> terminal.

ff When transferring logos via the optional digital interface box (Model No.: ET-YFB100G), “NO SIGNAL SLEEP” of ET-YFB100G must be set to “OFF” to avoid cutting off communication.

ff When [DIGITAL LINK] is selected, communication speed is fixed to 9 600 bps.

[FUNCTION BUTTON]

Displays the functions that are currently assigned to the <FUNC1> - <FUNC3> buttons on the remote control. Also, cancel the assigned settings.

Canceling the assigned settings of the <FUNC1> - <FUNC3> buttons

1)Press as to select [FUNCTION BUTTON].

2)Press the <ENTER> button.

ff The [FUNCTION BUTTON] screen is displayed.

3)Press as to select the function button (F1 - F3) where to cancel the assignment.

4)Press the <DEFAULT> button on the remote control.

5)When the confirmation is displayed, select [OK] and press the <ENTER> button. Note

ff You can also cancel the assigned settings by displaying the on-screen menu, selecting the menu item to be canceled (main menu, sub- menu, or details menu), and then pressing any one of the corresponding <FUNC1> - <FUNC3> buttons for at least three seconds.

[AUDIO SETTING]

Sets advanced audio functions.

Adjusting the volume

1)Press as to select [AUDIO SETTING].

2)Press the <ENTER> button.

ff The [AUDIO SETTING] screen is displayed.

3)Press as to select [VOLUME].4)Press qw to adjust the level.

Operation

Adjustment

Range

Press the w button.

The volume increases.

Maximum value 63

Press the q button.

The volume decreases.

Minimum value 0

Adjusting the left/right audio balance

1)Press as to select [AUDIO SETTING].

2)Press the <ENTER> button.

ff The [AUDIO SETTING] screen is displayed.

3)Press as to select [BALANCE].

4)Press qw to adjust the level.

Operation

Adjustment

Range

Press the w button.

The right volume increases.

L16 - R16

 

 

Press the q button.

The left volume increases.

 

 

 

 

ENGLISH - 77