Chapter 4
Setting the date and time automatically
1)Press as to select [DATE AND TIME].
2)Press the <ENTER> button.
ff The [DATE AND TIME] screen is displayed.
3)Press as to select [ADJUST CLOCK].
4)Press the <ENTER> button.
ff The [ADJUST CLOCK] screen is displayed.
5)Press as to select [NTP SYNCHRONIZATION], and press qw to change the setting to [ON].
ff The items will switch each time you press the button.
[OFF] | Disables [NTP SYNCHRONIZATION]. |
[ON] | Enables [NTP SYNCHRONIZATION]. |
6)Press as to select [APPLY], and press the <ENTER> button.
ff The setting of the time will be completed.
Note
ff To set the date and time automatically, the projector must be connected to the network.
ff If synchronization with the NTP server fails just after [NTP SYNCHRONIZATION] is turned [ON], or if [NTP SYNCHRONIZATION] is turned [ON] while the NTP server is not set, [NTP SYNCHRONIZATION] will return to [OFF].
ff Access the projector via the web browser to set the NTP server. Refer to “[Adjust clock] page” (x page 98) for details.
[SAVE ALL USER DATA]
Save the various setting values as a backup in the
2)Press the <ENTER> button.
ff The [SECURITY PASSWORD] screen is displayed.
3)Enter a security password and press the <ENTER> button.4)When the confirmation is displayed, select [OK] or [CANCEL], and press the <ENTER> button.
ff [PROGRESS] is displayed while saving data.
Note
ff The image setting registered in [USER LOGO] is not saved.
[LOAD ALL USER DATA]
Load the various setting values saved as a backup in the
2)Press the <ENTER> button.
ff The [SECURITY PASSWORD] screen is displayed.
3)Enter a security password and press the <ENTER> button.
4)When the confirmation is displayed, select [OK] or [CANCEL], and press the <ENTER> button. Note
ff The projector will go into the standby status to reflect the setting values when [LOAD ALL USER DATA] is executed.
80 - ENGLISH