Chapter 4  Settings — [PICTURE] menu

Note

ff When a name is changed, display of the [USER] menu is also changed.

[DAYLIGHT VIEW]

You can correct the image to the optimal vividness even if it is projected under a bright light.

1)Press as to select [DAYLIGHT VIEW].

2)Press qw or the <ENTER> button.

ff The [DAYLIGHT VIEW] individual adjustment screen is displayed.

3)Press qw to switch [DAYLIGHT VIEW].

ff The items will switch each time you press the button.

[AUTO]

Corrects the image vividness automatically.

[OFF]

No correction.

[1]Corrects the image to weaken vividness.

[2]Corrects the image to medium vividness.

[3]Corrects the image to high vividness.

Note

ff If [REAR/FLOOR] or [REAR/CEILING] is selected with the [PROJECTOR SETUP] menu → [PROJECTION METHOD], [AUTO] cannot be set.

ff [AUTO] mode may not operate properly if objects are placed on top of the projector.

ff If [PICTURE MODE] is [NATURAL], [REC709], or [DICOM SIM.], the factory default setting is [OFF].

[SHARPNESS]

You can adjust the sharpness of the projected image.

1)Press as to select [SHARPNESS].

2)Press qw or the <ENTER> button.

ff The [SHARPNESS] individual adjustment screen is displayed.

3)Press qw to adjust the level.

Operation

Adjustment

Range

Press the w button.

Contours become sharper.

0 - 15

 

 

Press the q button.

Contours become softer.

 

Note

ff If you press w while the adjustment value is [15], the value will become [0]. If you press q while the adjustment value is [0], the value will become [15].

[NOISE REDUCTION]

You can reduce noises when the input image is degraded and noise is occurring in the image signal.

1)Press as to select [NOISE REDUCTION].

2)Press qw or the <ENTER> button.

ff The [NOISE REDUCTION] individual adjustment screen is displayed.

3)Press qw to switch [NOISE REDUCTION].

ff The items will switch each time you press the button.

[OFF]

No correction.

[ON]

Corrects the noise.

Attention

ff Setting the projector may result in an image that appears different from the actual image. In such a case, set it to [OFF].

ENGLISH - 49