Panasonic PT-RW330U, PT-RZ370U Chapter, Dot, Mode, freq, (Hz), Note, DVI-I, (kHz), Format, (Dots), DIGITAL, Vertical, Horizontal, DVI-Idigital, Appendix — Technicalinformation

		Chapter 6	Appendix — Technical information
		Scanning frequency		Dot			Plug and play*1
Mode	Resolution	Horizontal	Vertical	clock	Format	COMPUTER/	DVI-I digital			HDMI/
	(Dots)			freq.		DVI-I				DIGITAL
		(kHz)	(Hz)
				(MHz)		Analog EDID	EDID1	EDID2	EDID3	LINK
	1 280 x 1 024	64.0	60.0	108.0	R/D/H	l	―	l	l	l
SXGA	1 280 x 1 024	80.0	75.0	135.0	R/D/H	l	―	l	l	l
	1 280 x 1 024	91.1	85.0	157.5	R/D/H	―	―	―	―	―
	1 400 x 1 050	65.2	60.0	122.6	R/D/H	l	―	l	l	l
SXGA+	1 400 x 1 050	65.3	60.0	121.8	R/D/H	―	―	―	―	―
	1 400 x 1 050	82.2	75.0	155.9	R/D/H	―	―	―	―	―
UXGA	1 600 x 1 200	75.0	60.0	162.0	R/D/H	l	―	l	l	l
1280 x 720	1 280 x 720	37.1	49.8	60.5	R/D/H	―	―	―	―	―
	1 280 x 720	44.8	59.9	74.5	R/D/H	―	―	―	―	―
1280 x 768	1 280 x 768	39.6	49.9	65.3	R/D/H	―	―	―	―	―
	1 280 x 768	47.8	59.9	79.5	R/D/H	―	―	―	―	―
1280 x 800	1 280 x 800	41.3	50.0	68.0	R/D/H	―	―	―	―	―
	1 280 x 800	49.7	59.8	83.5	R/D/H	―	―	―	―	―
WXGA+	1 440 x 900	55.9	59.9	106.5	R/D/H	―	―	―	―	―
WSXGA+	1 680 x 1 050	65.3	60.0	146.3	R/D/H	―	―	―	―	―
1920 x 1080	1 920 x 1 080*3	66.6	59.9	138.5	R/D/H	―	―	―	―	―
WUXGA	1 920 x 1 200*3	74.0	60.0	154.0	R/D/H	l	―	l	l	l

*1 Signals with l in the Plug and play columns are signals described in EDID (extended display identification data) of the projector. A signal, which has no l in the Plug and play columns but has an entry in the Format column, can be input. For signals without l in the Plug and play columns, resolution may not be selected in the computer even though the projector supports them.

*2 When a 1125 (1035)/60i signal was input, it is displayed as a 1125 (1080)/60i signal. *3 VESA CVT-RB (Reduced Blanking) compatible

Note

ff The number of display dots for PT-RZ370U is 1 920 x 1 080, and that for PT-RW330U is 1 280 x 800. A signal with a different resolution is converted to the number of display dots and displayed.

ff The “i” at the end of the resolution indicates an interlaced signal.

ff When interlaced signals are connected, flickering may occur on the projected image. ff DIGITAL LINK input compatible signal is the same as HDMI input compatible signal.

122 - ENGLISH