Chapter 4
Setting [AUTO POWER SAVE]
Set whether to enable the three functions [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION], and [AV MUTE DETECTION].
1)Press as to select [ECO MANAGEMENT].
2)Press the <ENTER> button.
ff The [ECO MANAGEMENT] screen is displayed.
3)Press as to select [AUTO POWER SAVE].4)Press qw to switch [AUTO POWER SAVE].ff The items will switch each time you press the button.
[ON] | Enables |
[OFF] | Disables |
5)Press as to select [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION], or [AV MUTE DETECTION].
[AMBIENT LIGHT | Adjust the light source power depending on the brightness of the location of the projector. | |
DETECTION] | ||
| ||
[SIGNAL DETECTION] | Reduce the power of the light source when there is no signal. | |
[AV MUTE DETECTION] | Reduce the power of the light source in AV mute mode. |
6)Press qw to switch the setting of [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION], or [AV MUTE
DETECTION].ff The items will switch each time you press the button.
[ON] | Enables the setting. |
[OFF] | Disables the setting. |
Note
ff When [AUTO POWER SAVE] is [OFF], [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION], and [AV MUTE DETECTION] cannot be set.
Setting [NO SIGNAL SHUT-OFF]
A function that automatically switches the power source of the projector to standby if there is no input signal for a certain period of time. The time before switching to standby can be set.
1)Press as to select [ECO MANAGEMENT].
2)Press the <ENTER> button.
ff The [ECO MANAGEMENT] screen is displayed.
3)Press as to select [NO SIGNALff The items will switch each time you press the button.
[DISABLE] | Disables the no signal |
[10MIN.] - [90MIN.] | Sets the time in |
Setting [STANDBY MODE]
Set the power consumption during the standby.
1)Press as to select [ECO MANAGEMENT].
2)Press the <ENTER> button.
ff The [ECO MANAGEMENT] screen is displayed.
3)Press as to select [STANDBY MODE].ENGLISH - 71