Chapter 4  Settings — [NETWORK] menu

Accessing from the web browser

1)Start up the web browser on the computer.

2)Enter the IP address set on the projector into the URL entry field of the web browser.

3)Enter the user name and the password.

ff The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the password is panasonic (lower case).

4)Click OK.

ff The [Projector status] page is displayed.

Note

ff If you use a web browser to control the projector, set [WEB CONTROL] to [ON] in [NETWORK CONTROL] (x page 90).

ff Do not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector from multiple computers.

ff Change the password first. (x page 103)

ff The administrator rights allows to use all functions. The user rights allow use of [Projector status] (x page 94), confirmation of the error information page (x page 95), [Network status] (x page 95), [Basic control] (x page 96), [Advanced control] (x page 97), and [Change password] (x page 103), only.

ff Access will be locked for a few minutes when an incorrect password is entered three times consecutively.

ff Some items on the projector setting page use the Javascript function of the web browser. The projector may not be able to be controlled properly if it is set with a browser that does not have this function enabled.

ENGLISH - 93