Panasonic PV-DV202 Insert Memory Card, About the M-CARD Lock Switch, Close the M-CARD Door

Quick Guide

Insert Memory Card*	Before you begin
	• Charge the Battery. (p. 14)

*Memory Card: MultiMediaCard or SD Memory Card (p. 94)

•Be sure to insert the Memory Card before using the Card PhotoShot. (p. 48) Below is a list of memory cards which can be used in this Palmcorder.

Memory Card		Capacity
SD Memory Card (RP-SD008BMKO) (supplied)	8	MB
MultiMediaCard (SanDisk brand)	8	MB, 16 MB
SD Memory Card (optional) (p. 92)	16 MB, 32 MB, 64 MB

SD Memory Card write protection switch

A write protection switch is located on the SD Memory Card. Sliding the switch to the “LOCK” position prevents writing on or formatting the card.

Write protection Switch

Before Use

1 Set POWER to OFF.

To remove the Memory Card...

2 Slide DOOR OPEN to open

M-CARD door.

3 Insert the Memory Card and hold in place until you hear a click.

4 Close the M-CARD Door.

Press here to eject the card.

About the M-CARD Lock Switch

POWER

M-CARD Lock

Note

•By sliding M-CARD Lock to LOCK, you can prevent POWER from accidentally entering the M-CARD position when changing POWER to CAMERA.

When inserting the Memory Card

Note cropped corner

•When inserting the Memory Card, insert with the cropped corner down as shown in the illustration above.

13