Panasonic PV-DV202 Card Features, Card PhotoShot, Press Photoshot to record an image

Card Features

Card PhotoShot

You can record still images to a Memory Card.

Warning

•Memory Card will not work when DV interface Cable (i.LINK) is connected.

3PHOTOSHOT

2JOG KEY

1POWER

M-CARD

Lock

2MENU

Image Resolution and Capacity (supplied 8MB Memory Card)

REC	Image	Capacity
Mode	Resolution
FINE	1280 x 960	Approx. 30 images
NORMAL	640 x 480	Approx. 70 images

•The number of images given for each mode applies when all images are taken in same mode.

•You can change recording modes at any time before capturing an image.

•The number of images that can be captured may differ depending on the subject. After capturing an image, the number may not decrease, or it may decrease by two. This is normal.

Warning

•While “PROCESSING” is displayed, DO

NOT turn off the Palmcorder or unplug the AC Adaptor (supplied) because this will cause irreversible damage to the memory.

Before you begin

•Connect the Palmcorder to a power source. (pp. 14, 15)

•Set POWER to OFF before inserting a Memory Card. (p. 13)

1 Slide the M-CARD Lock Switch to unlock, then set POWER to M-CARD.

•The POWER lamp lights red.

•Be sure POWER is fully turned to M-CARD position.

•“PLAY: PUSH PLAY KEY” is displayed for 10 seconds. (p. 50)

2 Press MENU to display CARD SETTING menu, then press JOG KEY to select NORMAL or FINE .

• Press MENU to exit this menu.

3 Press PHOTOSHOT to record an image.

•The PhotoShot image is recorded to the Memory Card.

•When SHUTTER is set to ON (Menu OSD: p. 108), still pictures are recorded with a visual shutter effect and click sound. If set to OFF, the still image will be displayed only.

48
	Forassistance, pleasecall: 1-800-211-PANA(7262)orsende-mailto:consumerproducts@panasonic.com