Panasonic UF-333 Troubleshooting, This feature is not compatible. The fax machine is, not answer

Troubleshooting

Mode Symptom Action Page

Cannot utilize the remote	This feature is not compatible. The fax machine is
turn-on feature of the	designed to answer after 8 rings if the TAM does
telephone answering	not answer.	--
machine (TAM). The fax
machine always answers
after the 8th ring.
Fax machine will not start	TAM that gives outgoing announcement only is not	--
up when the telephone	compatible. The fax machine will work with a TAM that will
answering machine is set	record Incoming message (ICM).
to give only an outgoing
message (OGM).
A beep...beep sound is	Speak a little slower between each word while recording	--
recorded on the telephone	an outgoing message (OGM).
answering machine.
Fax machine starts up in	Make sure the outgoing message (OGM) does not have a	--
the middle of the outgoing	silent pause longer than 5 seconds.
message even though the
caller wants to leave a
voice message.

8

TAM Interface

Trouble in

Unattended TAM I/F

Mode (OUT Mode)

Cannot record any incoming message (ICM). The fax machine always starts up at the end of the OGM and before the tape advances to the end of last ICM.(Your TAM only uses a single cassette tape to give OGM and record ICM.)

Set Fax Parameter No. 20 (Silent Detection) to ºInvalidº.

And, instruct the calling party to press twice on their touch-tone phone during the OGM to start up your fax machine remotely.

36

	Cannot receive from a	Set Fax Parameter No. 20 (Silent Detection) to ºValidº.		36
	machine that does not	Or, Instruct the calling party to press	twice on their
	send CNG signal (a short	touch-tone phone during the OGM to start up your fax
	beep tone every 3
		machine remotely.
	seconds) after dialing.
	Cannot retrieve message	Set Fax Parameter No. 20 (Silent Detection) to ºInvalidº.		36
	from the answering
	machine remotely, the fax
	machine always starts up
	after the command code is
	entered.
	Cannot receive a fax	Check your outgoing message, if it is too long, the calling fax		--
	message, but can record	machine may have timed out. Try to shorten your outgoing
	voice message.	message to less than 15 seconds, or ask the calling party to
		program your telephone number in their fax machine with 3
		pauses and a º#º at the end.(ex. 5551212 PAUSE PAUSE
		PAUSE #)
TAM Interface	Fax machine will not start	Increase the ring count for detection	on the telephone	--
	to receive with the	answering machine.
Trouble In
	telephone answering
Unattended Fax
	machine in the
Mode (OUT Mode)
	auto-answer mode.

113