Panasonic UF-333 manual Replacing the Print Cartridge, Troubleshooting

Troubleshooting

Replacing the Print Cartridge

If the Print Cartridge runs out of ink, the following message is shown on the display.

OUT OF INK

INFO. CODE=015

To replace the Print Cartridge.

1

2

Open the Printer Cover.

Pull the Print Cartridge forward until the Print Cartridge ºpopsº loose. Lift the Cartridge out of the Cradle by grasping the green top and discard it.

Install the new Print Cartridge, then close the Printer Cover. (see page 16)

3 The following message is shown on the display after closing the Printer Cover.

NEW PRINT CARTRIDGE

INSTALLED? 1:Y 2:N

Press
to return to standby.

If no action is taken within 10 seconds, the machine will default to º2 : Nº and return to standby.

Maintaining Print Quality : Keep the print cartridge in the cradle at all times. Removing the cartridge will expose it to air, causing the ink to evaporate, and degrade the print quality.

Keep the print cartridge in its ºhomeº position when the UF-333 is not being used. Leaving it out of position will cause the ink to evaporate quickly.

Storing Print Cartridge : The following instructions will help you when storing unused print cartridges.

•Keep the print cartridge in its sealed container until you are ready to use it.

•Store the print cartridge container at room temperature.

•Check the expiration date on the cartridge package and use before that date.

•Install the print cartridge in the cradle immediately after opening the sealed container.

Note: If your machine detects Out-of-ink even though the Print Cartridge still has enough ink, remove the Print Cartridge, wrap it in a paper towel to prevent spillage and shake it up and down above a waste can until the ink squirts from the nose. Then, re-install the Print Cartridge and make a few copies to confirm whether the Print Cartridge has recovered.

123