Panasonic UF-333 manual Halftone, Verification Stamp, Basic Transmission Settings, HALFTONE = Off

Basic Transmission Settings

Halftone

The Halftone setting is useful when sending photographs or illustrations with gray tones. Your machine is preset to HALFTONE = Off.

Press

HALFTONE

to:

HALFTONEHALFTONE

HALFTONE = Off HALFTONE = On

Note: When you select HALFTONE, your machine will automatically select Fine Resolution.

Verification Stamp

The Verification Stamp helps you to confirm successful transmissions by stamping the bottom of each successfully transmitted page with a small
mark.

Press

STAMP

to:

STAMPSTAMP

STAMP = Off STAMP = On

Note: 1. When you store a document in memory, the Verification Stamp will stamp on the document if it is successfully stored in memory. In this case the Verification Stamp is not a confirmation that the document was successfully transmitted. If you wish to disable the use of the Verification Stamp when storing document in memory, change the setting of Fax Parameter No. 28, see page 37.

2.To change the preset Verification Stamp position, change the setting of Fax Parameter No. 04, see page 35.

42