Panasonic UF-333 manual Printing Out Documents, Receive To Memory, in step

Receive To Memory

Printing Out Documents

After receiving a document with the Receive To Memory feature, the following message will appear on the display.

MESSAGE IN MEMORY < RCV TO MEMORY >

To print the document, follow the steps below.

1

2

3

4

5

6

FUNCTION 8

5 SET

3

SET

Enter the password to print the documents. (see Note 1)

Ex: 1 2 3 4

SET

SELECT MODE (1±5)

ENTER NO. OR 

RCV TO MEMORY=ON 1:OFF 2:ON 3:PRINT

RCV TO MEMORY=PRINT 1:OFF 2:ON 3:PRINT

INPUT PASSWORD

INPUT PASSWORD

1234

Machine will start to print the documents.

* PRINTING *

MEMORY RCV'D DOC

Note: 1. If the password has not been set, your machine will not prompt you to enter the password.

The documents will be printed immediately after pressing

SET

in step 4.

2.Once you set RCV TO MEMORY feature to On, the password cannot be changed (Fax Parameter No. 37 will not be shown on the LCD display). If you wish to change the password, set RCV TO MEMORY feature to Off first. Then change the password (see page 85).

86