Panasonic UF-333 manual Paper Specifications

Paper Specifications

In general, most plain bond papers will produce excellent results. Most photocopy papers will also work very well. There are many ºnameº and ºgenericº brands of paper available. Before purchasing large quantities, we recommend that you test various paper samples until you obtain the results you are looking for.

The following table summarizes the major specifications to consider when selecting white or colored paper.

Basic Weight	16 to 24 lb (60 to 90 g/m2)
Cut Edge Conditions	Cut with sharp blades, no visible frayed edges
Finished Dimensions	￿0.03º (0.8 mm) of nominal, corners 90° ￿0.2°
Grain	Long grain
Moisture Content	4% to 6% by weight
Opacity	84% minimum
Packing	Polylaminated moisture-proof ream wrap
Sizes	Letter	: 8.5º x 11º (216 mm x 279 mm)
	A4	: 8.3º x 11.7º (210 mm x 297 mm)
	Legal	: 8.5º x 14º (216 mm x 356 mm)
Type	Cut sheet
Wax Pick	12º (304.8 mm) minimum (Dimension)

Note: 1. It is possible that the paper meets the specifications listed above and still not print well because of the variations in the manufacturing. Therefore, we recommend that you test thoroughly before purchasing in large quantity.

2.Poor quality paper may reduce print quality and cause paper jams and other problems. If you encounter problems, switch to a higher grade of paper.

130