S u b n e t M a s k
IP networks are divided using subnet masks. The subnet mask address determines where the IP address belongs in the network. It
consists of four
To change the setting, from the Main Menu: Select Setup, Network. Then follow these steps.
1. Press or until you see
NETWORK
Subnet Mask
2.Press Enter/Pause. The current setting is displayed, for example:
Subnet Mask 255.255.000.000
3. Press | or | to move through the positions. Press Feed/Cut to |
scroll one digit at a time from | ||
you need, press Enter/Pause. | ||
For example, to change the subnet mask from 192 to 000, | ||
press | or | to highlight the first position and press |
Feed/Cut until you see 0, then press to select the next position and press Feed/Cut until you see 0, then press to select the next position and press Feed/Cut until you see 0. Press Enter/Pause to save the setting or press Escape/Clear to exit without saving.
If you enter a series of digits greater than 255 for any segment of the subnet mask and press Enter/Pause, the printer does not save the setting and no error appears on the display. Correct the subnet mask and then press Enter/Pause to save the setting.
4.Press Escape/Clear until you see the Main Menu.
