Changing Wireless Settings

Only configure the settings required for your network/printer.

1.Click the Wireless tab to configure the wireless network (802.11b/g) settings.

2.Set the Mode: Ad-Hoc or infrastructure. In Ad-Hoc mode, you do not need an access point. Infrastructure mode requires an access point to communicate.

3.Set the SSID. The SSID is a unique identifier that must match for all nodes on a subnetwork to communicate with each other.

4.Select the Radio type: 802.11b or 802.11b/g.

5.Set the Ad-Hoc channel: 1 to 11. All devices must be on the same channel to communicate.

6.Set the Speed: 1, 2, 5.5, 11, 12, 18, 24, 36, 48, or 54 (megabits per second).

7.Set the International Roaming: Disable, Strict, or Flexible.

3-14MonarchNet2 Operating Instructions

Page 48
Image 48
Paxar 9860 manual Changing Wireless Settings