Paxar 9860 manual Ssid

SSID

The Service Set Identifier (SSID) is a unique identifier that must match for all nodes on a subnetwork to communicate with each other. It consists of up to 32 characters (any printable character, including spaces). If using the space character, it must be enclosed in quotation marks.

Note: The SSID is case-sensitive.

To change the setting, from the Main Menu: Select Setup, Network, Wireless. Then follow these steps.

1. Press or until you see

WIRELESS

SSID

2.Press Enter/Pause. The current setting is displayed, for example:

SSID

ABC1234

3. Press or to move through the positions. Hold Feed/Cut to scroll quickly through the characters from 0-9;A-Z;a-z or press Feed/Cut once to scroll one character at a time. After you display the character you need, press Enter/Pause. You must press Enter/Pause after each character to save the change and continue.

To clear the SSID, press and at the same time when you are at the end of the SSID field. If you are in the middle of the field and you press and at the same time, any characters to the right of the cursor are cleared.

Note: If using the Monarch Paxar 9860 printer with the attached Monarch Paxar 939 keyboard, you may simply enter the SSID you need using the numeric keys and press .

4.Press Escape/Clear until you see the Main Menu.

Configuring the 802.11b/g and IP Settings 2-9