Paxar 9860 manual Do not use extended backfeed on non-knife printers

7.Set the Skip Index mode: No or Yes. Skip index allows you to print an image over multiple labels.

8.Set the Backfeed: Off, On, or Extended. Backfeed advances each printed label to the specified dispense position and then backs up the next label to be printed underneath the printhead.

Do not use extended backfeed on non-knife printers.

9.Enter a value for the Dispense Position (range is 50 to 200). This adjusts the stopping point of the label after it is printed.

10.Enter a value for the Backfeed Distance (range is 10 to 200). This is the amount to move the label backwards before printing.

11.Enter a value for the Contrast (range is –699 to 699). This adjusts the darkness of printing on the supply.

12.Enter a value for the Print Position (range is –450 to 450). This adjusts where data prints vertically on the supply.

13.Enter a value for the Margin Position (range is –99 to 99). This adjusts where data prints horizontally on the supply.

14.Click Submit when finished.

3-6MonarchNet2 Operating Instructions