Pioneer PDP 427CMX technical manual PDP Bracket PDK-5005 507CMX, Assembly Procedure

PDP Bracket: PDK-5005 [507CMX]

4.10.3 Assembly Procedure

1Temporarily fasten the vertical a and horizontal b frames using all of the M5 plus/minus screws with washers e.

				a
			c
			h
c		b		e
	h
a			g	j
	g		g	e
e	g
j
			h
		b
e	h			c
	c

2Attach the special eye bolts c to the spring washers h, and insert them into the appropriate holes. Secure the small flat washers j and nuts g (For additional safety, use double nuts).

c

h

Spring washer hexagonal nut (⋅ 4)

Insofar as possible, insert the bolt so that the nut goes all the way to its base.

1.Attach the special eye bolts together with the M8 nuts to the main unit.

Caution

		g
j
g		View from below
2. After passing the bolt	3. Tighten the nuts with	4. For additional safety,
through, secure it with	spanners.	use double
the small flat washer		nuts(Tighten the two
and nut.		nuts against each
		other).

Never use special eye bolts except in the designated locations.

If they are used on the Plasma Display itself, internal damage may result.

132