Pioneer PDP 427CMX technical manual 210

Menu Mode [Applicable only when a PDA-5003/PDA-5004 is installed]

6Use the [2/3] buttons to adjust the click frequency.

In step 4, the left side was aligned. Here the right side is aligned.

1.With the [3] button, move the display until the mask (black portion) protrudes into the right side of the image.

2.With the [2] button, move the display to the point where the mask on the right side disappears.

Screen 6

C L O C K		:	0
SET	SET		MENU EXIT

7In the adjustment in steps 5 and 6, the left side of the screen moves. With ‘POSITION’, accurately adjust the left side of the video display again.

As in step 4, used the [2/3] buttons to align the left side.

8In the adjustment in step 7, the right side of the screen moves. With ‘CLOCK’, adjust the right side again. As in step 6, use the [2/3] buttons to align the left side.

Repeat steps 7 and 8 until the adjustment value converges then adjust the ‘PHASE’. There are vertical lines, so it is easier to adjust the screen if the input signal has edges.

9Place the cursor on ‘PHASE’ then press the [SET] button.

0Using the [2/3] buttons to adjust the clock phase.

Move the vertical edge of the image to the point where it becomes bold.

Adjustment is now complete.

210