Pioneer PDP 427CMX Concerning frame delay lip sync, Video input signal Input vertical Frame delay

Precautions on Connecting Camera Images/Concerning frame delay (lip sync)

5.7 Precautions on Connecting Camera Images

Connecting and using moving images that are nearly still, such as images from a surveillance camera, could damage or reduce the life of the panel.

In this situation, it is necessary to set the image quality beforehand.

Set the ‘ENERGY SAVE’ function to ‘MODE2’ or ‘MODE3’ (pg. 178, 203).

5.8 Concerning frame delay (lip sync)

The following table shows the approximate time after the video signal is input until it appears on the display. It is the guideline when considering the audio delay time following the video (lip sync).

The video signal is, in multi-screen mode, delayed by approximately 1 V (there is no delay that exceeds 4 V) in the following cases.

•Right screen of side by side mode (left screen in a case where the same signals are combined)

•Subscreen of picture in picture mode

There is no frame delay in other situations.

(These data are reference values; they cannot be ensured.)

FRC				Video input signal	Input vertical	Frame delay
setting					frequency (Hz)	number (V)
				PAL, SECAM, PAL N, 625i (576i), 1125i (1080i)	50	4
		Normal time		NTSC, 4.43NTSC, PAL M, 525i (480i), 1125i (1080i)	60	3
				625p (576p), 750p (720p),1125p (1080p)	50	2
	Video signal			525p (480p), 750p (720p), 1125p (1080p)	60	1
ON		When zoom		PAL, SECAM, PAL N, 625i (576i), 1125i (1080i)	50	4
				NTSC, 4.43NTSC, PAL M, 525i (480i), 1125i (1080i)	60	4
		function is
				625p (576p), 750p (720p), 1125p (1080p)	50	2
		used	*2
				525p (480p), 750p (720p), 1125p (1080p)	60	2
					60
				PC signal	75	2
					85
				PAL, SECAM, PAL N, 625i (576i), 1125i (1080i)	50	3
		Normal time		NTSC, 4.43NTSC, PAL M, 525i (480i), 1125i (1080i)	60
				625p (576p), 750p (720p), 1125p (1080p)	50	1
	Video signal			525p (480p), 750p (720p), 1125p (1080p)	60
		When zoom		PAL, SECAM, PAL N, 625i (576i), 1125i (1080i)	50	4
				NTSC, 4.43NTSC, PAL M, 525i (480i), 1125i (1080i)	60
		function is
				625p (576p), 750p (720p), 1125p (1080p)	50
		used	*2			2
				525p (480p), 750p (720p), 1125p (1080p)	60
				FRC setting object signal *1	50
OFF					60	1
		Normal time			72
					60
				FRC setting non-object signal	75	2
	PC signal				85
				FRC setting object signal *1	50
		When zoom			60	2
					72
		function is
					60
		used *2		FRC setting non-object signal		2
					75
					85

*1: The FRC object signal in the PC signal is as follows.

640x480@60 Hz VGA, 848x480@60 Hz WVGA, 1280x768@60 Hz WXGA 1024x768@60 Hz XGA, 1280x1024@60 Hz SXGA, 1024x768@50 Hz XGA 1024x768@72 Hz XGA, 640x480@50 Hz VGA (only analog input), 848x480@50 Hz WVGA 1280x768@50 Hz WXGA, 1280x768@72 Hz WXGA, 1400X1050@60 Hz SXGA+

*2: The zoom function indicates the expansion functions based on H size, V size, and video wall in point zoom and integrator modes.

285