Pioneer PDP 427CMX technical manual Care and Maintenance When the cabinet gets dirty

[507CMX] Speaker System: PDP-S53-LR

2) Connect the cords

(Turn off the power of all connected units before connecting the cords.)

Use the provided speaker cords to connect the

R/L speaker jacks of the monitor to the speaker jacks of the speakers.

Once the cords have been connected, pull on the cords lightly to make sure that they have been connected firmly to the speaker jacks. An improper connection might result in the sound being interrupted or the appearance of noise in the output sound.

3)Care and Maintenance When the cabinet gets dirty...

• Wipe with a lit-free, soft, dry cloth.

If the cabinet is heavily soiled, soak a cloth in a neutral detergent solution, wring well, and wipe the cabinet. Remove any remaining moisture by wiping with a dry colth.

If you want to use a chemical cloth for cleaning, read any caution information provided with the chemical cloth product.

• Do not use solvent such as thinner or benzine for cleaning. These chemical can damage the surface finish, deteriorating or stripping the coating.

• To remove dust from the speaker nets, use a vacuum cleaner’s. Avoid applying the vacuum cleaner hose directly to the speakers without using a brush adapter or using a nozzle adapter.

• To prevent damage to the cabinet and speaker nets, do not scrach or hit them with hard objects. Also, do not stab the speaker nets with sharp objects.

Do not apply volatile chemicals such as insecticide on the cabinet. Avoid leaving a rubber or vinyl products in contact with the cabinet for prolonged periods. The surface finish can deteriorate or the coating may be stripped off.

Cord clampers

Remove the seal from the rear of the cord clampers, attach the clampers in the desired position, and clamp the cords into place.

Note that the speaker cords have positive and negative ends, and that you should be sure to insert them correctly.

Black

Red

Press the button of the speaker jack and keep it pressed down as you insert the wire of the speaker cord and then release the button.

139