Pioneer PDP 427CMX Adjustment and Setting in the Integrator Mode, Picture Adjustment

Integrator Mode

5.4.3 Adjustment and Setting in the Integrator Mode

For details about button controls, refer to section 5.4.2, “Example of Integrator Mode Operation” (pg. 215).

1) PICTURE Adjustment

The adjustable items shown below are a little different than in the menu mode’s PICTURE adjustment (refer to the instruction manual).

•PC input

CONTRAST, BRIGHTNESS, H. ENHANCE, V. ENHANCE, etc.

•Video input ★ (Applicable only when a PDA-5003 or PDA-5004 is installed.) CONTRAST, BRIGHTNESS, COLOR, TINT, SHARPNESS, etc.

For details, refer to section 5.1.4, “List of Adjustable and Settable Items” (pg. 162).

1After switching to the input (INPUT1 to INPUT5) to be adjusted, enter the integrator mode.

Select ‘PICTURE’.

Screen 1-1

For PC signal input

I N T E G R AT O R					I N P U T 1
P I C T U R E	S C R E E N		S E T U P			O P T I O N
C O N T R A S T		:		1 2 8
B R I G H T N E S S		: 1 2 8
H . E N H A N C E		:			0
V . E N H A N C E		:			0
W H I T E BA L A N C E
C O L O R D E T A I L
G AMMA		:			2 . 0
P I C T U R E R E S E T

SET

ENTER

MENU

EXIT

For video signal input

(Applicable only when a PDA-5003/PDA-5004 is installed.)

I N T E G R ATO R					I N P U T 1
PICTURE	S C R E E N		S E T U P			O P T I O N
C O N T R A S T		:		0
B R I G H T N E S S		:		0
C O L O R		:		0
T I N T		:		0
S H A R P N E S S		: 2 3
WH I T E BA L A N C E
C O L O R D E T A I L
G AMMA		: 2 . 0
P I C T UR E R E S E T

SET

ENTER

MENU

EXIT

2Perform adjustment.

Note

When there is PC signal input at INPUT1, 2, and 5, ‘COLOR’, ‘TINT’ and ‘SHARPNESS’ are unavailable. When there is video input, ‘H. ENHANCE’ and ‘V. ENHANCE’ are unavailable.

Use the [5/∞] buttons on the remote control or the main- control panel.

Perform adjustment using the [2/3] buttons on the remote control or the main-control panel to change settings.

It is possible to move to another item for adjustment using the [5/∞] buttons.

Screen 2

B R I G H T N E S S	:	0
SET SET		MENU EXIT

The value adjusted here becomes the center value for adjustment in the menu mode.

Press the [SET] button to return to screen 1-1or screen 2-2.

For details about the adjustable range, refer to section 5.1.4, “List of Adjustable and Settable Items” (pg. 162).

216