[507CMX]

Special Installation (Mounting to fittings)

3.5 Special Installation (PDP-507CMX)

The unit can be hung from or embedded in a wall. However, some installations impose additional limitations on operating temperatures and other factors.

Examine installation methods and the ambient conditions for your installation site. Refer to sections “3.1 Installation Site Requirements” (pg. 20), ”3.2 Installation Conditions (PDP-507CMX)” (pg. 22), and “3.4 Installation Procedures” (pg. 30) in this manual.

Measurements discussed in this manual assume the following conditions:

•A 100 % white input is supplied.

•Sufficient aging has been completed.

Make all measurements under identical conditions. The aging period required for correct measurement is about two and a half hours, depending on the time available at the installation site.

3.5.1 Mounting to fittings

Observe the following guidelines when mounting the unit to fittings. Notes 2 to 8 apply to all cases of mounting to fittings.

1Remove any objects from around the panel within a distance of 300 mm.

2Any unit deformation/warping occurring as a result of installation should be less than 4 mm.

3Never block or cover vents or other openings aside from those shown as blocked in the illustrations on the following page.

4The fittings should have a thickness of less than 20 mm.

(This limit does NOT apply to fitting in examples 1, 4, 6, and 7 on

the following page.)

5L-shaped fittings should have a thickness of less than 100 mm.

6 The strength of the fittings should be adequate to bear the weight of the display.

7 Take precautions to avoid sharply bending the power cable.

8 If necessary, remove the handles. When reinstalling the handles, completely tighten the screws for safety.

✩Operating environment for standard installation

•Ambient Temperature: 0 °C to 40 °C (examples 1 to 4)

✩Operating environment for vertical installation (*1)

•Ambient Temperature: 0 °C to 40 °C (vertical installation: examples 5 to 8)

✩Operating temperatures for Upside-Down Installations (*1, *2)

•Ambient Temperature: 0 °C to 35 °C (examples 1 to 4)

The operating temperature restrictions for the speaker system (PDP- S53-LR) are the same regardless of whether installation is horizontal or vertical.

*1 For this installation, set the ‘FAN CONTROL’ to ‘MAX’ as shown in “5.4.3 Adjustment and Setting in the Integrator Mode 14) Cooling Fan Control Setting (pg. 235)”.

*2 When INPUT2 has been selected, use input compatible signal up to 1280x1024 (60 Hz) at ambient temperature condition of 0 °C to 35 °C.

Note

When a video card other than PDA-5003/PDA-5004 is used, the operating temperature conditions given above may vary. Check the video card operating instructions for the conditions.

4 mm MAX

Maximum allowable deformation/ warping is 4 mm.

Less than 20 mm

(No thickness limitations in examples 2 and 4 on the following page.)

Less than 20 mm

(No thickness limitations in examples 2 and 4 on the following page.)

Less than

100 mm

L-shaped fitting

Arrange the power cable so that minimum stress is placed on it.

35

Page 34 Page 36
Page 35
Image 35
Pioneer PDP 427CMX technical manual Mounting to fittings, Operating environment for standard installation
Page 34 Page 36

PDP 427CMX specifications

The Pioneer PDP 427CMX is a high-definition plasma television that gained recognition for its impressive picture quality and advanced technology. Launched during a time when home entertainment was rapidly evolving, the PDP 427CMX stands out with its cutting-edge features and user-friendly design.

One of the key features of the Pioneer PDP 427CMX is its stunning display quality. With a screen size of 42 inches, this plasma TV boasts a resolution of 1024 x 768 pixels, which translates to a vivid and sharp picture. The panel uses a wide color gamut, enabling it to reproduce a broader range of colors with greater accuracy. This characteristic makes the television ideal for watching movies and sports, as it delivers a lifelike visual experience.

Pioneer's proprietary technologies further enhance the viewing experience. The TV features the company's renowned Pure Color Filter, which improves color fidelity and saturation. This technology allows the PDP 427CMX to render rich and vibrant colors, offering deep blacks and bright whites. Furthermore, Pioneer's Advanced Pure Drive technology works to eliminate motion blur, making fast-moving scenes appear smooth and fluid. This is particularly advantageous for action-packed films and sports broadcasts.

In terms of connectivity, the Pioneer PDP 427CMX includes several input options that cater to a wide range of devices. It comes equipped with HDMI ports, component video inputs, and composite video connections, allowing users to easily connect Blu-ray players, gaming consoles, and AV receivers. This versatility ensures incredible flexibility in setting up a home theater system.

The design of the PDP 427CMX is another highlight. It features a sleek and modern aesthetic that fits well within any living room. The ultra-slim bezel enhances the viewing area while maintaining a contemporary appearance. Additionally, the TV is equipped with built-in speakers that provide decent audio quality, although many users opt to pair it with an external sound system for an immersive experience.

Overall, the Pioneer PDP 427CMX plasma television remains a notable option for enthusiasts seeking an exceptional home entertainment experience. With its impressive picture quality, advanced technology, versatile connectivity, and elegant design, it embodies the innovation and craftsmanship that Pioneer has long been associated with in the world of audio and visual technology. Whether watching movies, playing games, or enjoying live sports, the PDP 427CMX delivers an unforgettable viewing experience.
Top Page Image Contents