Manuals / Pioneer / TV and Video / Flat Panel Television

Pioneer PDP 427CMX technical manual Input Response Signals, PC signals supported, Refresh rate

Models: PDP 427CMX

1 288

Download 288 pages 13.55 Kb

Page 8

Specifications

INPUT Response Signals

INPUT 1

7PC signals supported

	Resolution	Refresh rate		Remark
	(Dot x Line)	Vertical	Horizontal	Remark
	(Dot x Line)

	640x400	70.1 Hz	31.5 kHz	NEC PC-9800
	720x400	70.1 Hz	31.5 kHz	NEC PC-9800
		85.1 Hz	37.9 kHz
	640x480	59.9 Hz	31.5 kHz
		66.7 Hz	35.0 kHz	Apple Macintosh 13”
		72.8 Hz	37.9 kHz
		75 Hz	37.5 kHz
		85 Hz	43.3 kHz
		100.4 Hz	51.1 kHz	I/O DATA
		120.4 Hz	61.3 kHz	I/O DATA
	848x480	60 Hz	31.0 kHz
	852x480	60 Hz	31.7 kHz
	800x600	56.3 Hz	35.2 kHz
		60.3 Hz	37.9 kHz
		72.2 Hz	48.1 kHz
		75 Hz	46.9 kHz
		85.1 Hz	53.7 kHz
		99.8 Hz	63.0 kHz	I/O DATA
		120 Hz	75.7 kHz	I/O DATA
	832x624	74.6 Hz	49.7 kHz	Apple Macintosh 16”
	1024x768	60 Hz	48.4 kHz
		60 Hz	49.7 kHz	Work station (SGI)
		70.1 Hz	56.5 kHz
		75 Hz	60.0 kHz	( ) indicates Apple
		(74.9 Hz )	(60.2 kHz)	Macintosh 19
		85 Hz	68.7 kHz
		100.6 Hz	80.5 kHz	I/O DATA
		119.4 Hz	95.5 kHz
	1280x768	56.2 Hz	45.1 kHz
		59.8 Hz	48 kHz
		69.8 Hz	56 kHz
	1360x765	60 Hz	47.7 kHz
	1360x768	60 Hz	47.7 kHz	I/O DATA
	1376x768	59.9 Hz	48.3 kHz	I/O DATA
	1280x800	59.8 Hz	49.7 kHz	CVT
	1280x854	60 Hz	53.1 kHz	PC
	1152x864	60 Hz	53.7 kHz
		72 Hz	64.9 kHz
		75 Hz	67.5 kHz
	1152x870	75.1 Hz	68.7 kHz	Apple Macintosh 21”
	1152x900	66 Hz	61.8 kHz	Sun Microsystems LO
		76 Hz	71.7 kHz	Sun Microsystems HI
	1440x900	59.9 Hz	55.9 kHz	Apple Macintosh 17”
	1280x960	60 Hz	60.0 kHz
		85 Hz	85.9 kHz
	1280x1024	60 Hz	63.9 kHz	Work station (SGI)
		60 Hz	64.0 kHz
		60 Hz	64.6 kHz	Work station (EWS4800)
		71.2 Hz	75.1 kHz	Work station (EWS4800)
		72 Hz	78.1 kHz	Work station (HP)
		75 Hz	80.0 kHz
		76.1 Hz	81.1 kHz	Work station (SUN)
		85 Hz	91.1 kHz
		100.1 Hz	108.5 kHz	I/O DATA
	1400x1050	60 Hz	65.3 kHz
		74.9 Hz	82.3 kHz
		85 Hz	93.9 kHz
	1680x1050	60 Hz	65.3 kHz
	1600x1200	60 Hz	75.0 kHz
		65 Hz	81.3 kHz
		70 Hz	87.5 kHz
		75 Hz	93.8 kHz
		85 Hz	106.3 kH z
	1920x1200	59.9 Hz	74.6 kHz	CVT
	1920x1200RB	60 Hz	74.0 kHz	CVT

INPUT 2

7PC signals supported

	Resolution	Refresh rate		Remarks
	(Dot x Line)	Vertical	Horizontal	Remarks
	(Dot x Line)

	640x480	59.9 Hz	31.5 kHz
		72.8 Hz	37.9 kHz
		75 Hz	37.5 kHz
		85 Hz	43.3 kHz
		100.4 Hz	51.1 kHz
		120.4 Hz	61.3 kHz
	720x400	70.1 Hz	31.5 kHz	NEC PC-9800
		85.1 Hz	37.9 kHz
	848x480	60 Hz	31.0 kHz
	852x480	60 Hz	31.7 kHz
	800x600	56.3 Hz	35.2 kHz
		60.3 Hz	37.9 kHz
		72.2 Hz	48.1 kHz
		75 Hz	46.9 kHz
		85.1 Hz	53.7 kHz
		99.8 Hz	63.0 kHz
		120 Hz	75.7 kHz
	1024x768	60 Hz	48.4 kHz
		60 Hz	49.7 kHz	Work station (SGI)
		70.1 Hz	56.5 kHz
		75 Hz	60.0 kHz
		85 Hz	68.7 kHz
		100.6 Hz	80.5 kHz
		119.4 Hz	95.5 kHz
	1280x768	56.2 Hz	45.1 kHz
		59.8 Hz	48 kHz
		69.8 Hz	56 kHz
	1280x800	59.8 Hz	49.7 kHz
	1280x854	60 Hz	53.1 kHz
	1360x768	60 Hz	47.7 kHz	I/O DATA
	1376x768	59.9 Hz	48.3 kHz	I/O DATA
	1152x864	60 Hz	53.7 kHz
		72 Hz	64.9 kHz
		75 Hz	67.5 kHz
	1152x900	66 Hz	61.8 kHz	Sun Microsystems LO
		76 Hz	71.7 kHz	Sun Microsystems HI
	1440x900	59.9 Hz	55.9 kHz	Apple Macintosh17“
	1280x960	60 Hz	60.0 kHz
		85 Hz	85.9 kHz
		60 Hz	63.9 kHz	Work station (SGI)
	1280x1024	60 Hz	64.0 kHz
		60 Hz	64.6 kHz	Work station (EWS4800)
		71.2 Hz	75.1 kHz	Work station (EWS4800)
		72 Hz	78.1 kHz	Work station (HP)
		75 Hz	80.0 kHz
		76.1 Hz	81.1 kHz	Work station (SUN)
		85 Hz	91.1 kHz
	1400x1050	60 Hz	65.3 kHz
		74.9 Hz	82.3 kHz
	1680x1050	60 Hz	65.3 kHz
	1920x1080	50 Hz	56.2 kHz
		60 Hz	67.5 kHz
	1600x1200	60 Hz	75.0 kHz
	1920x1200RB	60 Hz	74.0 kHz	CVT

8

Image 8

Pioneer PDP 427CMX technical manual Input Response Signals, PC signals supported, Refresh rate, Dot x Line Vertical

Contents

Technical Manual Ver To use this product safelyTable of Contents Table of Contents Precautions RGB signals from AV devices other than PCsIntroduction InputFeatures and Functions of this device ¶ Supports wide range of computer signals analog/digital¶ Power-Saving Design ¶ High reliability for commercial applicationsSpecifications 42V type AC Plasma Panel Input Response Signals PC signals supportedRefresh rate Dot x Line VerticalExternal Dimensions TOP View Filter SurfaceTOP View Connection panel PDP-507CMX Light Sensor for the remote/ambient light sensor/indicatorMain Unit Operation Panel Operation panel on the main unit Controls and ConnectorsMain unit Plasma Display Section Video Card PDA-5003 Section Video Card PDA-5004 SectionConnection Panel PDP-427CMX RS-232C= Main Power switch Use this switch to toggle the panel’s main power on and OFFINPUT1 Mini D-sub, 15-pin connector female Pin layout INPUT2 DVI-D 24 pin connector female Pin layoutPin layout Combination IN/OUT terminal pin layoutRemote Control Unit Page 507CMX 427CMX Installation Site RequirementsSafety Precautions 507CMX 427CMX Installation Site Requirements Temperature and humidity conditionsPower requirements Effective remote control distanceHeat dissipation Unit mm507CMX Installation Conditions Rear view diagram Side view diagramCalculating heat quantity Product mounting holesInstallation Conditions 507CMX Poor methods for securing Suggested methods for securingMounting surface warping Heat dissipation Cover any of these openings427CMX Installation Conditions Holes 6 places Holes 4 placesInstallation Conditions 427CMX Secured at eight pointsMounting surface warping Installation Procedures 507CMX 427CMX Transportation precautionsUnpacking PDP-507CMX Ref. No TermsInstallation Procedures Installation Procedures 507CMX 427CMX 507CMX 427CMX Installation Procedures WiringOrganize cables together using the provided speed clamps Using pliers, twist the clamp 90 and pull outwardTo attach the speed clamps to the main unit To remove speed clampsOperating environment for standard installation Ambient Temperature 0 C to 40 C examples 1 toOperating environment for vertical installation *1 Operating temperatures for Upside-Down Installations *1, *2Special Installation Mounting to fittings 507CMX ExampleHanging on the wall Requirements when used with PDP-S53-LR speaker system507CMX Special Instruction Hanging on the wall Special Installation Hanging on the wall 507CMX Flush-wall installationWall-mounted installation Wall-embedded installation507CMX Special Installation Embedding in the wall Operating Temperature RestrictionsEmbedding in the wall Viewed from AboveSpecial Installation Embedding in the wall 507CMX Thermometer temperature measurement pointEmbedding in walls with no space provided behind the unit When the display is put in a box Usage temperature conditions BOX air temperatureAmbient temperature 0 C to 35 C Rear view the following area should be made of mesh507CMXSpecial Installation Ceiling suspension with wires Ceiling suspension with wiresAmbient Temperature 0 C to 40 C Sides of the vertical and horizontal center linesSpecial Installation Ceiling suspension with wires 507CMX Hanging on the wall lengthwise 507CMX Special Installation Hanging on the wall lengthwiseOperating Temperature Restrictions *1 Special Installation Hanging on the wall lengthwise 507CMX Temperature in space X and Y Mm to 370 mm Viewed from Above Viewed from the Right Side507CMX Embedding in walls with no space provided behind the unit 507CMX Horizontal surface Operating Temperature Restrictions *1 507CMX Special Installation Installed facing upwardInstalled facing upward Special installation Installed facing upward 507CMX Usage temperature conditions *1Mm or more To 40 C 507CMX Special installation Horizontal connectionsHorizontal connections Mm to 300 mm or less To 35 C Mm or more To 40 C Special installation Multiple 507CMXMultiple Operating environment for vertical installation *1, *2 Mounting to fittingsLess Special Installation Mounting to fittings 427CMXMm or Requirements when used with PDP-S56-LR speaker system 427CMX Special Instruction Hanging on the wallSpecial Installation Hanging on the wall 427CMX Flush-wall installation427CMX Special Installation Embedding in the wall Front of the unit Rear of the unitSpecial Installation Embedding in the wall 427CMX Thermometer temperature measurement pointEmbedding in walls with no space provided behind the unit Special installation When the display is put in a box 427CMX 427CMX Special Installation Ceiling suspension with wires Ambient Temperature 0 C toSpecial Installation Ceiling suspension with wires 427CMX 427CMX Special Installation Hanging on the wall lengthwise Operating Temperature Restrictions *1, *2Special Installation Hanging on the wall lengthwise 427CMX Viewed from Above Viewed from the Right Side 427CMX Embedding in walls with no space provided behind the unit 427CMX 427CMX Special Installation Installed facing upward Horizontal surfaceSpecial installation Installed facing upward 427CMX Usage temperature conditions *1427CMX Special installation Horizontal connections Horizontal connectionsSpecial installation Multiple 427CMX Multiple427CMX Special installation Standard Mounting Components Features and Characteristics 507CMX 427CMX Handling the Standard Mounting Components Handling precautionsPrecautions for installation contractors Installation of the Attachment Stand 427CMX Insert the unit into the stand427CMX Installation of the Attachment Stand DimensionsSpecifications Video Card PDA-5003/PDA-5004 507CMX 427CMXAccessories PDA-5004 Video-relatedPDA-5004 External DimensionsPDA-5003 PDP-507CMX connection panel when equipped with PDA-5003 PDP-507CMX connection panel when equipped with PDA-5004PDP-427CMX connection panel when equipped with PDA-5003 PDP-427CMX connection panel when equipped with PDA-5004Installing procedures Installation NotesInstallation Impedance selector switch is found only on the PDARemove the two screws holding the video card Holding the inside tabs, pull the video card straight outInput connectors on the Plasma Display with video card When using PDA-5003When using PDA-5004 Connection to INPUT1 and INPUT5When connecting to Analog RGB in INPUT1 On-screen setup is necessary after connectionWhen connecting to Analog RGB INPUT5 When connecting to Component Video INPUT5Connection of G on Sync analog RGB source Connection of composite Sync analog RGB Source Connection of separate Sync analog RGB SourceWhen connecting to Analog RGB OUT INPUT1 To an external monitorINPUT1 Connection to INPUT2 Connection to INPUT3Connection to INPUT4 Computer or AV componentAbout DTV set top box connection Video Video signalSignal type Signal format Audio connections for component connected to Audio connectionsAudio connection for component connected to INPUT3 Signal Format Remark Input 1Applies only when equipped with PDA-5003/PDA-5004 Vertical Horizontal Signal RemarkPackage dimensions Table Top Stand PDK-TS07 507CMX 427CMXStabilization bolts eye screw Operating instructions Other factorsUnit mm inch External Dimensions When using Plasma Display PDP-507CMXWhen using Plasma Display PDP-427CMX Stand assembling Assembling StepsAttaching the Stand to the Plasma Display Stabilizing on the floor Using a wall for stabilization 103 Tilt Mount Unit PDK-5011 507CMX 427CMX Mounting hardware and Plasma Display PDP-507CMXMounting hardware and Plasma Display PDP-427CMX Components507CMX 427CMX Tilt Mount Unit PDK-5011 Units mm106 107 Criterion for the vertical location Angle setupCriterion when its angle is 109 Attachment Restrictions Wall Mount Unit PDK-WM01 507CMX 427CMXSPHC, SS400 External Dimensions When using Plasma Display PDP-507CMX 507CMX 427CMX Wall Mount Unit PDK-WM01Assembling the mounting hardware Mounting the display Display Rotate the screw to adjust the tilt Check that the hook has been hung beforeWhen removing the Plasma Display If there are speakers installed on both sidesLoosening the screw on the tilt adjustment metal fitting Unlock the lock bar two locations on the left and rightAlways have at least two people manage This task Precautions when installing the hardwareRaise to remove the Plasma Display Adjustable range of angles Ceiling Mount Unit PDK-5012 507CMX 427CMX507CMX 427CMX Ceiling Mount Unit PDK-5012 R673118 Preparations Installing the mounting hardwareInstall the mounting hardware Screw the Plasma Display to the hanger at four locations Attach the Plasma DisplayAttach the Plasma Display to the hanger Detailed Angle Standard Diagram Left-right Adjustment Vertical AdjustmentLayers of packing Package weightMobile Cart PDK-5014507CMX 427CMX 123 Mobile Cart PDK-5014 507CMX 427CMX Units mmRemove the rear cover How to installDisassembling the display stand 126 Adjusting the angle of the Plasma Display Screen 128 129 When mounted to the Plasma Display PDP-507CMX Weight Kg 9.0 lbs. mounting hardware onlyPackage weight Kg 11.0 lbs Mm W ⋅ 736 mm H ⋅ 148 mm D131 Assembly Procedure PDP Bracket PDK-5005 507CMXAn example of use WrongAs the last step secure the M8 spring nuts h Level table, as illustrated, and afterWire hanging 135 Accessory parts for two speakers Woofer for low tonesTweeter for high tones Nominal impedanceExternal Dimensions when mounted to the Plasma Display Speaker System PDP-S53-LRSpeaker System PDP-S53-LR 507CMX Installation on the Plasma DisplayInstallation procedure Care and Maintenance When the cabinet gets dirty Accessory parts for 2 speakers Speaker System PDP-S56-LR Units mm inchSpeaker System PDP-S56-LR 427CMX 142143 Before Beginning Adjustment Operation ModeBefore Beginning Adjustments PDP-507CMX List of Input Correspondence SignalsInput correspondence signals personal computer signals 147 148 PDP-427CMX 150 151 Screen size Personal computer signal Remarks Screen sizeDOT by DOT PDP-427CMX153 Signal Format Screen size Remark Screen size Signal Format155 156 157 158 Dot x Line Vertical Horizontal Resolution Refresh rate Screen size Dot x lineRB* Abbreviation for Reduce Blanking that is set by CVT 160 161 List of Adjustable and Settable Items Menu ModePDP-507CMX/PDP-427CMX PDA-5003/PDA-5004 Slot card other than PDA-5003/PDA-5004 Integrator mode 167 168 169 Saving to Memory Last MemoryAging 149 351 Normal Operating Mode Normal Operation ModeAbout normal operation mode Lower right Upper right Lower left Normal Operating ModeSide-by-side OFF Picture-in-picture Menu Mode About menu modeConcerning the display of the OSD of each item Images shown here may differ from the actual display imageExample of a Menu Mode Operation Remote control unitPress the Menu button to display the menu screen Press the SET buttonOFF on Adjustment and setting in the Menu ModePower Management Setting Auto Others Signal Format SettingOthers ....... Selectable resolutions are displayed Screen Menu Language Display Setting Resolution KHz Signal format Remarks PolarityEnergy Saving Setting To cancel MUTE, press the Menu button, Input button etcSTANDARD1, STANDARD2 Standard MODE1, MODE2 MODE3 Mute‘ENERGY SAVE’ setting is common for all inputs Screen PDP-427CMXDaylight Saving Time Timer SettingProgram/Repeat Timer Setting Orbiter Setting OFF MODE1 MODE3 MODE2Soft Focus Setting ‘SOFT FOCUS’ setting is common for all inputs ScreenAuto Set Up Mode Setting Auto SET UP ModeScreen Position, Clock Frequency and Clock Phase Adjustment Example When a PC signal is input to INPUT1 1024 x185 Auto Function Mode Setting As shown belowPIP Detect Setting ‘PIP DETECT’ setting is common for all inputsOFF By S PIP Split Freeze Setting‘SPLIT FREEZE’ setting is common for all inputs Press the Menu button to display the menu Item Applicable only when a PDA-5003 PDA-5004 is installedConcerning the display of the OSD of each LOW Color Temperature SettingHigh Power Management and Auto Power OFF Setting Factory settingOFF/DISABLE Place the cursor over ‘POWER Management AutoOFF High 2 3 Middle 2 3 LOW DNR digital noise reduction SettingMiddle Mpeg NR Setting CTI Setting OFFPurecinema Setting OFFConversion is performed without I/P is convertedInput Correspondence Signal OFFConnected Color Decoding SettingINPUT1, INPUT2, INPUT5 Color System Setting INPUT4 Auto43NTSC PAL N199 200 DVI Setting PLUG/PLAY PCPC 2 3 Video LOW 0 to 255 High 16 to 235202 Auto To the brightness of the room204 Timer Setting OFF Disables Daylight Saving Time mode206 207 208 209 210 211 212 213 Integrator Mode About the Integrator ModeExample of Integrator Mode Operation To continue with adjusting another item, repeat steps 5 toFor video signal input Adjustment and Setting in the Integrator ModePicture Adjustment White Balance Adjustment Color Detail setting Use Buttons to switch between items ScreenGamma Setting 31.8Position H. Position Clock H. Position Clock Phase Screen Screen Position AdjustmentScreen For PC signal input 221 SUB Volume Setting Audio block diagram concept diagramProgram Timer Setting Program timer settingsTo reset the program To clear the set contentsViewing the program timer screen Screen Mask Setting Side Mask Setting Auto Side Mask OFF227 Video Wall Setting Position Type Normal Auto ID OFF On Delay ABL LinkSetting Method Setting the ID NO. SET Setting the screen dividerSetting the position Setting the display modeID positions for nine panels ID positions for 16 panelsSetting the Power on Delay Setting the Power on DelayWhen one, four, and nine screen Video Walls On ........... Turns on the power approximately everySetting the ABL Link Baud Rate Setting Remote Control ID Assigning an ID01H to FFH ... The ID number is set to the designated Number234 MAX Cooling Fan Control Setting‘FAN CONTROL’ setting is common for all inputs Screen Setting the Screen size OSD Display SettingSetting the Screen display 237 On OFF Front Indicator SettingOn Normal LED function OFF Lights red during standby Screen Color Mode Setting ‘COLOR MODE’ setting is common for all inputsPRO USE Setting Factory setting UnderscanImage Process Normal Signal Type Motion Image ProcessPure Mono ToneBlue only High CNTChanges the frame rate FRC Setting‘FRC’ setting is common for all inputs Screen Applicable only when a PDA-5003 or PDA-5004 is installed VIDEO/PCLast INPUT1 Multi INPUT2 Power on Mode SettingVolume Setting when Multi is selected INPUT1 INPUT2INPUT1 2 3INPUT2 2 3INPUT3 INPUT5 2 3INPUT4 Last 2 3 0 to 42Seamless SW Setting SELECT1SELECT2 Seamless SWMirror Mode Setting ‘MIRROR MODE’ setting is common for all inputs Screen OFFMultiscreen Setting By S SizeBy S Layout PIP Size Fade PIPSide by SIDE1 Side by SIDE3Side by SIDE4 Side by SIDE5Select the size of the Picture in Picture sub-screen PIP1PIP3 PIP2252 Repeat Timer Setting Setting the single screen Repeat TimerSetting the two screen Repeat Timer Setting the Video Wall Repeat TimerFunctional Lock ‘BUTTONS LOCK’ ‘IR LOCK’ ‘BUTTONS & IR LOCK’ ‘MEMORY LOCK‘Center Position Display 257 258 259 260 261 RS-232C Adjustment About the RS-232C AdjustmentInterface RXD TXD CTSTXD RXD RTS GND CTS TXD RXD RTS GNDConnect the panels as shown in the figure below Combination ConnectionConnection method Precautions when assigning IDs ID is assigned from the PC Commands IDC ID ClearID Assignment IDS ID SET266 267 MENU-SETUP related commands Sets Multi Screen to PoutP side by side 4-RMENU-OPTION related commands Signal FormatINTEGRATOR-SETUP related commands INTEGRATOR-PICTURE related commandsINTEGRATOR-SCREEN related commands INTEGRATOR-OPTION related commands Screen Mask272 Other commands PIP fade in function effective274 Quest Commands Quest Command TableData Content Size Remarks Obtaining QST Status InformationQPS Obtaining integrator/SCREEN information QPI Obtaining Integrator/PICTURE informationQWB Obtaining integrator/WHITE Balance information QSS Obtaining Setup information QSO Obtaining menu integrator/OPTION informationMain screen input function Main screen sizeQAP Obtaining machine name QSU obtaining the audio statusQCI Obtaining time information Table of commands not compatible with PDP-505CMX COFExample 1 When the data is missing 1 Byte Example 2 When 1 Byte of data in the data is unreadableCheck Sum Examples of check sum applicationsScreen Burning To enjoy using your plasma display for many years Standard Functions Settings cannot be changedSetting example Setting with Menu Mode Setting with Integrator ModeConcerning frame delay lip sync Video input signal Input vertical Frame delayThese data are reference values they cannot be ensured NumberSelf-diagnosis Function PrecautionsError Message Remedy Disconnect and Remove Hardware Connection procedureCabinet and Remote-control Unit Maintenance Readjustment of the White BalanceScreen front protection panel Vents