Pioneer PDP 427CMX technical manual 427CMX Special Installation Hanging on the wall lengthwise

[427CMX] Special Installation (Hanging on the wall lengthwise)

3.6.6 Hanging on the wall lengthwise

Carefully read the following imformation before attempting to mount the unit on the wall. Observe the various limitations

specified below.

Be sure to mount the unit so that twisting, bending, or any other deformation does not exceed 4 mm.

Shaded areas indicate attachment points for mounting hardware. : Thermometer (temperature measurement point)

Attach so that the fan is on the left side when viewed from the rear.

1022

52.5

52.5

D

21.6

610

B

Avoid blocking or covering this area on the upper and lower sides.

93.4	25	C
		10
	D

10

A

✩		Operating Temperature Restrictions (*1, *2)
		Distance from wall (A)	B	C	D	Ambient temperature
		50 mm or more	100 mm or more	50 mm or more	50 mm or more	0 °C to 35 °C
*1	For this installation, set the ‘FAN CONTROL’ to ‘MAX’ as shown in “5.4.3 Adjustment and Setting in the Integrator
	Mode 14) Cooling Fan Control Setting” (pg. 235).
*2	When INPUT2 has been selected, use input compatible signal up to 1280x1024 (60 Hz) at ambient temperature
	condition of 0 °C to 35 °C.

65