INSPECTING THE LF 6600
The following items should be included in the LF 6600 carton:
•one LF 6600 with Bezel assembly (Tower comes completely assembled)
•one AC power cable
•one User Manual
•one combination manual baseplate/door lock release tool
•I/O cables (optional)
•terminators (optional)
The following optional items, if ordered, will have been shipped with the LF 6600 in separate cartons:
•LM 6000 Media Cartridges
•Rack Mount Installation Kit
•Blank Panel Kit
After unpacking the LF 6600, check for:
•damage to the chassis cover, chassis and bezel
•damage to connectors
•dislocated or broken controls and indicators
Report all discrepancies, missing items and damaged equipment to your supplier.
If condensation exists on the drive, allow the moisture to evaporate by exposing the LF 6600 to the operating environment for at least 6 hours before powering on the unit.
REPACKING THE LF 6600
The LF 6600 should be repacked using the original packing materials. Prior to packaging the LF 6600, close the baseplates as described in the next section. Repack the LF 6600 using the following procedure.
CAUTION
Shipping the LF 6600 without closing the baseplates may result in damage to the drive which is not covered under warranty.
PLASMON LASER MAGNETIC STORAGE - LF 6600 User Manual Page 28
