CONNECTING POWER AND SCSI CABLES
After the LF 6600 has been installed in its operating location, refer to the next three sections for power cord installation, SCSI cable installation and SCSI cable installation for a single device.
The LF 6600 has two SCSI input/output (I/O) connectors on the rear panel that are used to interface the drive with other SCSI devices (see figure below). Either SCSI connector can be used as the input or output port because the internal controller cable connection is common to both connectors.
SCSI
CONNECTORS
AC POWER
CABLE
AC POWER
SWITCH
EP006059
Rear Panel of the LF 6600 Showing SCSI Connectors and AC Power Cord
PLASMON LASER MAGNETIC STORAGE - LF 6600 User Manual Page 50
